Jump to content
SAU Community

Recommended Posts

-I'm going to have to back Mark up here...the clutch definitely isn't slipping, I assure you. I drove it a few weeks back.

-In regard to the other things, it doesn't leak any oil, so I assume everything has been fixed since he posted.

-He drives the car like a girl, never seen redline or anything like that. Gets driven very rarely, cause he's too much a bitch to pay petrol ;)

Interpreting what you said last night on here, this Chris guy is a friend of yours and lives in your house being fed by your mum....hardly an independant third party...

he is a friend who comes here once in a while for a feed.. and how is this relevant..?

frankly i dnt care if lee buys it or not.. I KNW ther is nothing wrong with it.. thats why its not for a quick sale @ 15k like the boost cruising kid!...

yes over a year ago.. and if it was slipping wouldnt it be BAD now..? but the fact is it wernt.. so it might have been something .. as if i remember from a year ago.. this is bullshit

I HAVE BEEN HONEST. and i forgot 1 point about the AFM which was fixed a bloody year ago.. so asif i would remember it without someone bringing it up?

Clutch slipping was "something else"!!! Are you kidding?? The clutch would be fcked and you've been driving it soft so it hasn't recently slipped...under hard driving it would still be fcked...clutches don't fix themselves and I don't think anything else causes them to randomly slip other than them being on their way out....

yes over a year ago.. and if it was slipping wouldnt it be BAD now..? but the fact is it wernt.. so it might have been something .. as if i remember from a year ago.. this is bullshit

I HAVE BEEN HONEST. and i forgot 1 point about the AFM which was fixed a bloody year ago.. so asif i would remember it without someone bringing it up?

some one did bring it up and you did remember, but you didn't tell me...

your words not mine.....

i call BULLSHIT!!

Clutch slipping was "something else"!!! Are you kidding?? The clutch would be fcked and you've been driving it soft so it hasn't recently slipped...under hard driving it would still be fcked...clutches don't fix themselves and I don't think anything else causes them to randomly slip other than them being on their way out....

well ther is many things that might contribute. eg wheel spin, surging.. and mis judgement..

IF IT IS SLIPPING WHY ISNT IT ROOTED AFTER A YEAR?

-I'm going to have to back Mark up here...the clutch definitely isn't slipping, I assure you. I drove it a few weeks back.

-In regard to the other things, it doesn't leak any oil, so I assume everything has been fixed since he posted.

-He drives the car like a girl, never seen redline or anything like that. Gets driven very rarely, cause he's too much a bitch to pay petrol ;)

LOL i like this one.....

he told me NO ONE else has EVER driven his car.... you you have cool....

or he wiped it??

not really his friend more of his brothers friend otay i see, so you like to watch your friends brother and take notes

-I'm going to have to back Mark up here...the clutch definitely isn't slipping, I assure you. I drove it a few weeks back.

-In regard to the other things, it doesn't leak any oil, so I assume everything has been fixed since he posted.

-He drives the car like a girl, never seen redline or anything like that. Gets driven very rarely, cause he's too much a bitch to pay petrol ;)

- unless your driving the car hardish you probably wouldn't know if the clutch is slipping

- If you only go around to his house every now and again and your his brothers friend how do you know if its leaking oil, do you hoist it up and check everything??

- If he never drives the car that's another reason he hasn't noticed the clutch getting worse..and probably why it's not leaking as much oil.

Meh.....everything just sounds suss....should have been upfront about EVERYTHING from the start. Sif you couldn't remember everything....thats like saying ohhh I didn't remember I fcked the diff in it 6 months ago...you knew, you just didn't want it to affect your chances of the sale going through....

Think about how you'd feel if this was the flip side situation and Lee hadn't told you all these things...you can't honestly say you wouldn't have pulled out of the deal....

dude ive told u ppl have driven my car.? sean my bro and vic to his house.. wanna knw how far chris drove my GTR... ask him..

it was down the driveway and back so i could get the liberty out that was parked infront.. DUDE!

THEN HOW DOES HE KNOW IF THE CLUTCH IS SLIPPING...you're digging a deeper hole...

well ther is many things that might contribute. eg wheel spin, surging.. and mis judgement..

IF IT IS SLIPPING WHY ISNT IT ROOTED AFTER A YEAR?

because clutches last a long time after they start slipping if they're treated right. Come on Mark your an ex-mechanic.....you know the difference between wheel spin, surging etc and a clutch slipping i hope...

If you only go around to his house every now and again and your his brothers friend how do you know if its leaking oil, do you hoist it up and check everything??

His parents are quite anal about cars parking on the driveway that leak oil. My old car leaked oil all over it and I got in trouble ;) If his car did, they'd probably disown him :(

ASK CHRIS..

all of u's stop being faggots and listen.. if u got a question direct it at me or whoever else.

chris was in my brothers grade he comes over every so often. has a meal we go out to places.. sometimes in the GTR. my brother sean has driven the GTR. from church and i followed in the R34. victor another mate has driven it. that is the ONLY people who have driven it apart from the odd buyer.

in regards to the clutch. it is not slipping or it wouldnt be able to be driven! its not slipping now. drive it forurself lee

the rear diff leak is from the Breather up top. homer rules said to clean the breather and i did and its all fixed!... the gearbox breather has not been cleaned yet but doesnt seem to have oil on it anymore. so leads me to believe it was drips from the service.

the AFM was not a major issue and was resolved over a year ago. and i have been asked many times by people why i have alfoil on it? as a heat shield for shrink wrap. the alfoil aint ther now because the heat shrink doesnt shrink anymore. thats the full story.. http://www.skylinesaustralia.com/forums/in...howtopic=113284

and to top it all off.. lee hasnt asked me all the questions. eg this and that. he asked me if anything is wrong with ur car???. and i said cv boot bushes paint peel. and the diff breather. i did not mention the afm as it slipped my mind and if someone did mention it which i think was noel..? then i told the story.

and the AFM is not a problem with the car anymore..

any other questions..?

and keegs.. its a long time ago. i dnt remember the clutch issue thats why i am denieing it!.. whatever happened to innocent untill proven guilty?

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
    • OK, if it idles at 1000+ with the AAC, its not an idle airflow problem. The cold start valve just gives extra air when the engine is cold, but you have enough air without it to idle at 1000. I think you are back to a fuel problem, sorry. Can you see the fuel pressure staying constant or does it drop as the revs drop to a stall?  
×
×
  • Create New...