Jump to content
SAU Community

Recommended Posts

blank ported 26 head, once john's seen it we'll decide what else is going in it (260/270 10.25 cams for sure atm)

Your right, I am delighted.

Interesting your going for that cam selection though. Any reason other then conronic hunt as to why you wouldnt go bigger with a built head?

Your right, I am delighted.

Interesting your going for that cam selection though. Any reason other then conronic hunt as to why you wouldnt go bigger with a built head?

it's a track/hill climb car so i'm after low down/mid punch and the 260/270 i've been told by 2 shops now would be ideal. it'll drop the peak power down abit, but i'll have improved low down/mid power, so it'll work out better.

also no need for oversize valves now

it's a track/hill climb car so i'm after low down/mid punch and the 260/270 i've been told by 2 shops now would be ideal. it'll drop the peak power down abit, but i'll have improved low down/mid power, so it'll work out better.

also no need for oversize valves now

nigga please peak power = dick size :blink:

:action-smiley-069:

<3

nigga please peak power = dick size :blink:

:wave:

<3

indeed, but how cut would you be if/when a 'lower powered' car kicked yo ass? hows my dick size then :action-smiley-069:

go 264/272....or even better 272/272 :(

nah, tomei only do 260 or 270

and i'm goin tomei as my engine builder has this to say:

"tomei make horsepower, jun & hks are overpriced, and are not accurate in their sizings i.e hks undersize their cams & jun oversize their cams, while tomei are spot on"

indeed, but how cut would you be if/when a 'lower powered' car kicked yo ass? hows my dick size then :blink:

nah, tomei only do 260 or 270

and i'm goin tomei as my engine builder has this to say:

"tomei make horsepower, jun & hks are overpriced, and are not accurate in their sizings i.e hks undersize their cams & jun oversize their cams, while tomei are spot on"

Maybe your builder just gets tomei stuff cheap?

Because he might be right but, jun and hks are pretty big names and it would be a pretty big call to say there both not up to scratch. Not saying theres anything wrong tomei either btw.. just throwing it out there...

indeed, but how cut would you be if/when a 'lower powered' car kicked yo ass? hows my dick size then :blink:

nah, tomei only do 260 or 270

and i'm goin tomei as my engine builder has this to say:

"tomei make horsepower, jun & hks are overpriced, and are not accurate in their sizings i.e hks undersize their cams & jun oversize their cams, while tomei are spot on"

fair enough.

indeed, but how cut would you be if/when a 'lower powered' car kicked yo ass? hows my dick size then :blink:

nah, tomei only do 260 or 270

and i'm goin tomei as my engine builder has this to say:

"tomei make horsepower, jun & hks are overpriced, and are not accurate in their sizings i.e hks undersize their cams & jun oversize their cams, while tomei are spot on"

True, but my e-forum dick will still be bigger.

Maybe your builder just gets tomei stuff cheap?

Because he might be right but, jun and hks are pretty big names and it would be a pretty big call to say there both not up to scratch. Not saying theres anything wrong tomei either btw.. just throwing it out there...

he doesnt sell gear, he just builds motors lol

Tomei make good gear. 270in/270ex then :wave:

On a serious note 260/270 selection is sensible.

:blink:

True, but my e-forum dick will still be bigger.

not when you dont have a car :action-smiley-069:

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...