Jump to content
SAU Community

Recommended Posts

if you run a greddy plenum it will open up the top end and it shouldnt nose over...probably need a good exhaust manifold too (6boost). Our gt30 .82 rear went to 320rwkws without water injection and it pulled all the way to 8k redline. Remove all possible restrictions in the bolt ons and you can run the smaller puffers further to the edge without losing power.

Im up to 332rwkw now on 21psi and still have stock cams...

So a goal of 350rwkw (which to be honest is too much for a daily driven car) is easily achieved from the Garrett GT30R also know as the GT30/40...

Im at 21psi by 4000rpm btw, so its quite streetable, just farking stupid round town when it comes onto boost and jumps sideways... :unsure:

So i turn the boost controler down to 16psi where it makes just on 280rwkw and thats far easier to handle round town... :O

Im up to 332rwkw now on 21psi and still have stock cams...

So a goal of 350rwkw (which to be honest is too much for a daily driven car) is easily achieved from the Garrett GT30R also know as the GT30/40...

Im at 21psi by 4000rpm btw, so its quite streetable, just farking stupid round town when it comes onto boost and jumps sideways... :O

So i turn the boost controler down to 16psi where it makes just on 280rwkw and thats far easier to handle round town... :P

thats promising. i said noel's car will break the 400rwkw mark, and if ur results are anything to go by, he should do it fairly comfortably :unsure:

all noel's has to do, is pick up 69kw from 4psi more boost, cams & massive headwork, piece of piss i reckon

thats promising. i said noel's car will break the 400rwkw mark, and if ur results are anything to go by, he should do it fairly comfortably :unsure:

all noel's has to do, is pick up 69kw from 4psi more boost, cams & massive headwork, piece of piss i reckon

Easy.

if my bitsa can can 490rwhp/365rwkw on a td06-25g with t78 wheels on 1.5bar (3800rpm) Noel will piss it in

all noel's has to do, is pick up 69kw from 4psi more boost, cams & massive headwork, piece of piss i reckon

Fkn A doggie, shouldn't be a problem. Andy got 306rwkw on 18psi i'd like to see them bump it up to 22 or so and see what he can get. He doesn't think it'll be much of a difference but with the new fuel pump and shiz he shouldn't be running out of fuel like last time. I'm trying to convince him to go back to chiptorque, best tune we ever had was from them.

theres heaps of stuff on youtube, theres a clib with arabs drifting a Carrera GT and a McLaren Mercedes SLR....

I too am watching youtube clips...

cept i'm reminiscing so mine are in the form of

http://www.youtube.com/watch?v=wor-Z4SyWCg

http://www.youtube.com/watch?v=Qmve365Ti1k

I too am watching youtube clips...

cept i'm reminiscing so mine are in the form of

http://www.youtube.com/watch?v=wor-Z4SyWCg

http://www.youtube.com/watch?v=Qmve365Ti1k

かわいらしい さくら - MISS KITTEH! says:

haha and I wasn't a fan of human nature

かわいらしい さくら - MISS KITTEH! says:

except for one track which was very BSB/nsync

かわいらしい さくら - MISS KITTEH! says:

http://www.youtube.com/watch?v=Qmve365Ti1k

Josh says:

some one will think im queer when they see this history

かわいらしい さくら - MISS KITTEH! says:

bahahah it will just confirm rumours

Josh says:

they're only true when im drunk

Josh says:

lol

かわいらしい さくら - MISS KITTEH! says:

z so i'd find you at the beat then?

かわいらしい さくら - MISS KITTEH! says:

hehe

Josh says:

they sell cheap drinks

Josh says:

quiet u

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I know people cry at the price of the Getrag 12-14k for a conversion now, but it really is a nice mid point. Not going to get change from 10k on a gearset installed.  $30k++ for sequential.   I know you run the risk of a damaged used one and parts are hard to get but as a street car gearbox its really hard to beat. If you enjoy a more traditional manual, its the choice no question.     
    • Time to decide what’s more import, your power level or your budget because you’re going to struggle to keep both 
    • Our Southern Highlands Cruise is proudly registered with “R U OK?” Day.  Sometimes the best way to check in on your mates is by getting out for a drive together. Sharing a common passion like cars creates the perfect space to chat, connect, and support each other.  A simple “R U OK?” can make all the difference. Let's enjoy the drive, the company, and look out for one another. PLEASE WEAR YELLOW FOR “R U OK?” DAY Sunday 14th September 2025 9:30AM Meeting Crossroads Homemaker Centre 10:00AM Cruise Departure Via Old Hume Hwy 11:45AM Arrival at Mittagong RSL Club Meet Location: Crossroads Homemaker Centre Final Destination: Mittagong RSL Club *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yep, its been down for a while, as I understand it it will be back soon.
    • Yeah I also looked at Plazmaman, but, it ended up alot  cheaper getting black ones through EFI when you also added in the delivery cost
×
×
  • Create New...