Jump to content
SAU Community

Recommended Posts

mineral oil marki, best stuff for diff's apparantly :D

apparently.. yeah heard bout that too.. was gonna go castrol as im a castrol man. but heard some shit with castrol and redline in cuscos.. so i got 2.5L of penrite coming.. short notice shit.. 80w-140 should be fine.. will change it every 10kms.. :)

any other suggestions guys

no but im serious was told that i should use not synthetic on cusco diffs.. as it shudders with synthetic..

meh penrite it is unless i can find some redline cheap.

The shuddering can be corrected with an additive that redline also sells.

You should only need 1.5L so 2 x 1L bottles is all that is required. $60 and you're sailing!

howdy all,

week end is over :P

got myself a nismo short shifter and a Z32 today and marki - :)

shal be good getting it all in, im over the hks manifold idea now after talking with murnane again on sat they reckon slap the biago internally gates sucker on there and tune, cause it should keep me happy for a while

its solved guys, basically we were discussing if my mate with a gts4, could simply remove the altessa pump fuse to allow him to slide corners and do burnouts...

was intersting and went gor a while

Redline at any price is cheap you tightarse.

im tight.. pretty sure students dont go out and buy 700 diffs like that..

y not buy some of that cusco oil then? 90 bucks for the bottle isnt it?

wher is this from.. im keen... found kaaz oil..

The shuddering can be corrected with an additive that redline also sells.

You should only need 1.5L so 2 x 1L bottles is all that is required. $60 and you're sailing!

think ill go to autobarn tomorrow. wher do u find the oil u speak of for $60

howdy all,

week end is over :(

got myself a nismo short shifter and a Z32 today and marki - :D

shal be good getting it all in, im over the hks manifold idea now after talking with murnane again on sat they reckon slap the biago internally gates sucker on there and tune, cause it should keep me happy for a while

haha great. how much u pay.. yeah i dnt need the Z32 yet.. think ill keep my 160kwish for a while.

nice eh.. ther is a N-S mounted 4G63 in a EVOIX in japan. designed for drift.. no more AWD.. kinda pointless i think

got it of 666DAN for a great price, getting his gauges too when he gets a chance to pull em out. he said you were trying to get it but i had already given the word... timing my friend!

if i only had a doller for every time i saw a deal on these forums im usually too slow to act.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...