Jump to content
SAU Community

Recommended Posts

If you want an exhaust thats good bryn I got my one from japan 3in full stainless for very good price if your prepared to wait a little i can maybe help you out?

I will never again pay over a 1000 bucks for an exhaust ever!!

If you want an exhaust thats good bryn I got my one from japan 3in full stainless for very good price if your prepared to wait a little i can maybe help you out?

I will never again pay over a 1000 bucks for an exhaust ever!!

Any info on this mate?

learnt my lesson from buying cheaper parts before,

oh true, how much do these roughly go for? and is shipping cost alot?

Im finally going to get my thumb out my ass and get a full exhuast so sorta looking into all areas

http://www.tvshark.com/read/?art=arc1639

Man Shoots To Make Hole In Wall For TV Cable, Kills Wife: [ send to a friend ]

A Missouri man, who was trying to install a satellite television system, fired a shot from the inside of his home after several unsuccessful efforts to punch a hole through the exterior wall and ended up killing his wife who was standing outside the house.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...