Jump to content
SAU Community

Recommended Posts

can anybody recommend a decent place to get a computer from?

got about 1k to spend

don't need monitor, speakers, keyboard or operating system

my last computer finally gave up on me so time for an upgrade.

any particulars specs i should look for or keep away from?

can anybody recommend a decent place to get a computer from?

got about 1k to spend

don't need monitor, speakers, keyboard or operating system

my last computer finally gave up on me so time for an upgrade.

any particulars specs i should look for or keep away from?

Computers are evil machines that shouldnt be mention in public, stay away from all computers. :/

indy = boobs

way too many ladies in tights shirts today and not enough with no tops at all... :ninja:

saw the cops storm an apartment with nudie women and all of them were arrested...

looks like the crack down is serious business this year...

there were flyers being handed out at the gates basiclly saying keep your tops on...

indy = boobs

way too many ladies in tights shirts today and not enough with no tops at all... :D

saw the cops storm an apartment with nudie women and all of them were arrested...

looks like the crack down is serious business this year...

there were flyers being handed out at the gates basiclly saying keep your tops on...

:P

not sure if this is the right topic or not, but here goes. Moving to Brissy in Dec. Wondering about areas to look for flats. I was told Kangaroo Point is good, but this is from an older bloke (50's). I am not looking for the high school hang out or anything, just a nice area, nice flat, lower crime level, and some sort of night life. Oh and it needs a lockup for the future GTR.

I have a million other questions, but will start with this..

Cheers,

Ryan

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...