Jump to content
SAU Community

Recommended Posts

Anyone wanta buy my ZX6R???

Its going for trade in on Saturday unless someone takes it off my hands sooner...

Have signed paperwork at $7600 trade...

So if you want it, obviouslly it can be your for that money, as the dealership is only going to turn around and sell it for 10k+

Which is farkin cheap for an 04 with less than 17k on the clock... ;)

The cheapest on bikesales.com.au in similar condition is $10,990

Just thought id post a quick comment as its no skin off my nose if no one wants it...

Guys,

I went to buy a rear strut brace and was sold a front instead, so before I take it back is anyone interested in a polished JIC front strut brace to suit an R33. I will sell it for what i paid for it ($220) if not I will take it back and get them to provide the correct one.

Cheers

Mushroom

damo i thought i told ya not to strip man your scaring the kids for gods sake!!

P.S hows the batt?? and whens the sexy pic shoot tell aliesha no luck wit da modlez

i sowwi but i know the kids like it :P

battery seems fine still need to go to ECC to get all wiring checked and get my Power FC put in :blink:

and the sexy pic shoot with aliesha will have to wait as she is in syd and models you say :blink: and sif you cant get models

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...