Jump to content
SAU Community

Recommended Posts

this r34

and im not with you on that one bro - this thing is mint

Haha... because you've not done research on importing. Remember? I was in the market for a 34gtr before and I've looked at all options. I'm even quite familiar with the import process myself. A stock NUR would be around 80-90k mark. To make the NUR produce that kinda figure (400awkw) isnt hard at all. All you need is fuel, ecu, boost ($5k job?). Thats all. You might even get away with their stock turbos if they're the 34 N1s. Now even with turbos, considering -5, do you think it'll cost you another 50k to get your stock NUR to produce that power? All the mines shit is just branding imo. So what if its got all the ztune stuff? From memory, Kristian told me the ztune for sold for around 160k mark. And also, I saw a genuine mines on sale a few years ago for less than that price.

Actually I failed to notice 1 point. The reason why its priced higher is probably because the owner throw in the original NUR engine in the deal as well.. That could be worth an extra 15k?

Yea ztune are the most sought after but who in the right mind would buy it? I know I wouldnt if I have that kinda money. Cant justify that. But a NUR, yes. If the price is only gonna be around 80s.

ps: Unless you've got too much money to spurge. Maybe you should share the love and we can all own a 34 gtr. Hahaha

Haha... because you've not done research on importing. Remember? I was in the market for a 34gtr before and I've looked at all options. I'm even quite familiar with the import process myself. A stock NUR would be around 80-90k mark. To make the NUR produce that kinda figure (400awkw) isnt hard at all. All you need is fuel, ecu, boost ($5k job?). Thats all. You might even get away with their stock turbos if they're the 34 N1s. Now even with turbos, considering -5, do you think it'll cost you another 50k to get your stock NUR to produce that power? All the mines shit is just branding imo. So what if its got all the ztune stuff? From memory, Kristian told me the ztune for sold for around 160k mark. And also, I saw a genuine mines on sale a few years ago for less than that price.

In what world are you going to get 400awkw with 5k? The Z tune has a lot more to it than just throwing a load of branded parts in. They were all stripped back to a bare shell and everything was completely rebuilt. After it was all spot welded etc. The amount of labour in building a car like that is ridiculous.

ztune is the tits (if its real and not a fake)

the ztune is the most sort after GTR of them all, people would swap R35's for a 34 ztune...

Would anyone with a Z tune swap it for a 35 though? I doubt you would get a z tune for under 400k tbh.

Actually I failed to notice 1 point. The reason why its priced higher is probably because the owner throw in the original NUR engine in the deal as well.. That could be worth an extra 15k?

Yea ztune are the most sought after but who in the right mind would buy it? I know I wouldnt if I have that kinda money. Cant justify that. But a NUR, yes. If the price is only gonna be around 80s.

ps: Unless you've got too much money to spurge. Maybe you should share the love and we can all own a 34 gtr. Hahaha

I would buy a Z tune if I had the cash.

Haha... because you've not done research on importing. Remember? I was in the market for a 34gtr before and I've looked at all options. I'm even quite familiar with the import process myself. A stock NUR would be around 80-90k mark. To make the NUR produce that kinda figure (400awkw) isnt hard at all. All you need is fuel, ecu, boost ($5k job?). Thats all. You might even get away with their stock turbos if they're the 34 N1s. Now even with turbos, considering -5, do you think it'll cost you another 50k to get your stock NUR to produce that power? All the mines shit is just branding imo. So what if its got all the ztune stuff? From memory, Kristian told me the ztune for sold for around 160k mark. And also, I saw a genuine mines on sale a few years ago for less than that price.

havent done any research in importing as i have no want to import a car, i can just appreciate a rare car, therefore i see it worthwhile - however tuning advice coming from the person who said they can get 300awkw in their gtr with just a pfc...

35's are crap with there stupid auto wannabe manual

amen

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...