Jump to content
SAU Community

Recommended Posts

i do love pink bits

Well who doesn't?

look what i found!

Lol, that car has been off the road for f*cking ages (something like 1.5 years) and this was its first cruise back on the road (got regod about 2 days before). That photo is about 200m from the meet point, that's how long it lasted :D. Gotta love 31s.

It blew a cooler pipe no less than 5 times on the cruise.

edit - and is that you dan in the hat?

Yes

f**king hot hot hot 31

The one in the background? Yes it is :D

Well i just set the bbq on fire...

had to run down to the shed to the race car to steal the fire extinguisher from it...

note to self, tomorrow i need to buy a fire blanket and two new fire extinguisher's...

Well i just set the bbq on fire...

had to run down to the shed to the race car to steal the fire extinguisher from it...

note to self, tomorrow i need to buy a fire blanket and two new fire extinguisher's...

I have a fire blanket.. freebie from work you can have it if you want it

keep it, you might need it one day...

im just thinking in advance, blanket and fire extinguisher for the kitchen and then a spare fire extinguisher for the garage...

oh and i better replace the one i used tonight...

im just glad i had one, or i would not be on the intenet right now... id be in hospital with burns pulling the bbq out into the back yard, or with no house (ie. no pc)...

amazing VeilSide RX-7 Fortune build in dubai,

looks like alot of work

wow, super long video with not much happening

to sum it up for people who don't want to waste 9 mins

dude in a white dress drives a stock rx7 with a body kit

keep it, you might need it one day...

im just thinking in advance, blanket and fire extinguisher for the kitchen and then a spare fire extinguisher for the garage...

oh and i better replace the one i used tonight...

im just glad i had one, or i would not be on the intenet right now... id be in hospital with burns pulling the bbq out into the back yard, or with no house (ie. no pc)...

Interesting how we don't think about fire issues until they happen and usually they are a close call.

Side note : What were you cooking ?

wow, super long video with not much happening

to sum it up for people who don't want to waste 9 mins

dude in a white dress drives a stock rx7 with a body kit

i was referring to the level of craftmanship put on the bodywork , from what i hear he has a 20B being put in this year, alot of time and money has been spent, looks nice.

also the "dress" is called a dishdash LOL

i was referring to the level of craftmanship put on the bodywork , from what i hear he has a 20B being put in this year, alot of time and money has been spent, looks nice.

also the "dress" is called a dishdash LOL

yeh, the body kit is pretty intense

dishdash.....

asking for lolz

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...