Jump to content
SAU Community

Recommended Posts

Apparently it works alright on the rbs. If it blows the bottom end, sure I can find a 30 bottom end for a case of beer.

My first R32 was a GTS with the manifold, turbo, injectors and 'cooler from a blown GTSt added to the stock motor after I lost my licence and had 3 months to kill.

Try a td06 on 2 litres and then come see me.

Why would I do somthing silly line that

Apparently it works alright on the rbs. If it blows the bottom end, sure I can find a 30 bottom end for a case of beer.

A case of beer. .. and the 5000 dollar build to make it all work!

All the lags.

-5s I beleive.

brand new -5's indeed.

-5s are pretty close to too lazy on a 2.6 for my liking.

Bunta's right. -5 on 2.6ltr is pretty laggy in comparison to -9s (GTSS) or -7s (R34 N1s) and are more suitable for 2.8lt built engine.

But we will see what it delivers first before I start ranting on about how useless they are on the street.

Been there done that! Surge ported 3076 sounded amazing too and kicked hard. .. but the lag was :(

That's why I went 6 gears instead of 5.

And added AVCS (Subaru vtec yo).

And went E85.

And v-mount.

And Twinscroll...

Granted a normal sized turbo from the start probably would have been far easier, but where's the fun in that???

We could do this... Or have the ark running by then and take it down. Hence why I said take it off the road.

We could do this.

You never said what you thought of Adelaide wines...

How.

Does.

She.

Put.

Up.

With.

You?

I wonder the same thing sometimes

I'm getting mine done custom. ;). Only way to be. :)

I want a custom one for the Ark.

agreed. Mine are some hybrid thing based on 2510s and high flowed. They are good but can't recommend them to others as who know what the part numbers are lol

Yeah, I miss my old GTR number 1 which had GT-SS.

I almost put 2510s in it but sold it off 2 weeks before I'd killed 2 turbos after bit of faffing about and in the end a pair of GT-SS went in and was loving life.

Bunta. I purchased a 24 tooth cam disc item number DSM24t to try and mitigate some of the timing jitters when they raise their ugly head in the future.

Where from? To be honest, with your engine being brand new, I do think that is a solution that will work for you, and even if it doesnt at least Sean will know what to look for and be able to tell you if it didn't fix the issue

Yeah, I miss my old GTR number 1 which had GT-SS.

I almost put 2510s in it but sold it off 2 weeks before I'd killed 2 turbos after bit of faffing about and in the end a pair of GT-SS went in and was loving life.

Yeah, they are pretty much spot on in terms of useable power

Where from? To be honest, with your engine being brand new, I do think that is a solution that will work for you, and even if it doesnt at least Sean will know what to look for and be able to tell you if it didn't fix the issue

http://triggerdisc.com/

Sean seemed rather relieved after I told him that I swapped from PFC to Haltech.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...