Jump to content
SAU Community

Recommended Posts

What's the plan for oil and water lines? gonna get the makita out and tap that shit yourself? Going stock lines or braided?

Was reading over Dans thread and he used the heater hoses and oil was from one of the lines from the oil filter relocation kit.

Was reading over Dans thread and he used the heater hoses and oil was from one of the lines from the oil filter relocation kit.

Ahh I see. The toit method, like it. How do n/a injectors compare to turbo ones? Do you need the turbo ecu too?

Ahh I see. The toit method, like it. How do n/a injectors compare to turbo ones? Do you need the turbo ecu too?

Toit?

Will need turbo injectors and better fuel pump. Wanted to get the bulkier, harder to find peices first.

Ecu- nistune. :)

Toit?

Will need turbo injectors and better fuel pump. Wanted to get the bulkier, harder to find peices first.

Ecu- nistune. :)

Sorry. Slang for tightass among my mates haha.

Yeah fair enough. I reckon all those odds and ends are going to end up costing just as much as a whole new engine :s people want silly money for r34 turbos in particular. Did you see the hiflowed 34 turbo in the four sale section? Only 600. Pretty good considering a stock one will probably cost 300

Hey all. First post this weekend I think. Did so much to Kathryn's ute

Spent 6 hours trying to get one side of the upper control arm out.

Put it back together do the other side should only take about 2 to do now I know how to do it and have the right tool

Then the ball joints. Swap the pian arm for the right one tomorrow

And gearbox back in tomorrow after a rebuild

Hahah verrrry verrrrrrrrry productive weekend and verry tiring

Sorry. Slang for tightass among my mates haha.

Yeah fair enough. I reckon all those odds and ends are going to end up costing just as much as a whole new engine :s people want silly money for r34 turbos in particular. Did you see the hiflowed 34 turbo in the four sale section? Only 600. Pretty good considering a stock one will probably cost 300

Makes sense.

I've worked out that this should all cost about $1500 (as a rough estimate). The majority of parts purchased can be bolted on to the DET block if we go down that path in the future. Saw the high flow and was very interested... We are also doing this on strict numbers as it really is Chants project.

Makes sense.

I've worked out that this should all cost about $1500 (as a rough estimate). The majority of parts purchased can be bolted on to the DET block if we go down that path in the future. Saw the high flow and was very interested... We are also doing this on strict numbers as it really is Chants project.

fair enough.

fair enough.

Planning to do this more as a staged project. It does mean that you get a few extra parts along the way but means that it's drive able more often.

Part 1 - factory turbo RB25DE+T

Gather most of the main parts and get her going

Part 2 - 30 bottom end

Past 3 - 25/30DET with 3076.

Planning to do this more as a staged project. It does mean that you get a few extra parts along the way but means that it's drive able more often.

Part 1 - factory turbo RB25DE+T

Gather most of the main parts and get her going

Part 2 - 30 bottom end

Past 3 - 25/30DET with 3076.

cool should be good in the end

This is so true!

Though I will say the chosen method seems likely to give you more pains in the ass than normal but Anna and I learned a hell of a lot form our pain in the ass project that could have been done easier.

Though I will say the chosen method seems likely to give you more pains in the ass than normal but Anna and I learned a hell of a lot form our pain in the ass project that could have been done easier.

There's almost always a better way to do things. Taken a look at practicality, cost, ease, cost, cost etc this seems to work.

Are you talking about the 32 gtst?

There's almost always a better way to do things. Taken a look at practicality, cost, ease, cost, cost etc this seems to work.

Are you talking about the 32 gtst?

I actually dont think it will work from an ease point of view and also quite possibly a cost point of view (Have seen whole NEOs go for 1100 ish) but after you are done you will know a whole lot more about the car which is good.

Nah not so much the R32, it was a series of unfortunate events and shit workshops. The Sil80 was the one where we spent endless time screwing around trying to get factory bits to work ect ect. Not lots of money, just countless hours finding parts lol

Well I've been stuck with trying to figure out this GameCube emulator.....nothing is easy when it comes to me and computers. I'm not a god damn IT specialist!!! GRrrrrrrrrrrr!!!!!!

I hate computers with a passion~

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
×
×
  • Create New...