Jump to content
SAU Community

Recommended Posts

Once my car is complied and on the road in the next couple of weeks, the following parts will come available over the next few months

Series 2 full front bolt on panels, would suit front repair or series 1 front upgrade

Bonnet $350, (sold to Alex)

Guards Lh Rh $225 ea, (sold to Alex)

bonnet hinges $60 pr, bonnet catch $40, part or all of radiator support $SOLD

Factory Xenon head lights $SOLD

Factory standard headlights suit compliance $500 pr(sold to Alex)

Factory high beam driving lights $300 pr (sold to Alex)

Factory front indicators in front bar $150 pr (sold to Alex)

Ms factory front bar has some damage needs repair $275 NEW PRICE

Front bar reo $(sold to Alex)

Dolphin front grille $(sold to Ega4it)

Factory Brakes front and rear calipers, disks, pads $300 (Sold to Mike)

Factory wheels 16x7 inch and 70% snow tyres 205/55/16 $SOLD

Factory series 2 exhaust complete with the 2 new cats for compliance rusty $75

Tipronic auto 4wd gearbox 105km $400 (Sold to Mike)

Auto center console and other bits from manual conversion $POA

Caster rods R33 gtr aswell $60 pair

Rear top camber arms $60 pair

KYB shocks and springs, not height adjustable $SOLD

Volk GTC 18x8 +30 wheels no tyres $SOLD

post-14923-1149730559.jpg

post-14923-1150245542.jpg

post-14923-1150245551.jpg

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 weeks later...

hey kyb suspension ey.... am excited. when you have a look at it, give me a price and ill see how it compares with new parts from SK.

Would they suit? i figure the only drivetrain difference is the tiptronic auto, but i dont think that would effect it...

  • 4 weeks later...

would be definitely interested in the factory xenon headlights if they arent sold? if so how much ya want for em? and what wiring changes will need to be made to put the car back so they work?

mike are you seriously keen for those brakes? Cos id really love to upgrade my S1 calipers etc.

If you dont want them, ill give darrin his 10% deposit on... well, as soon as you let me know...

Update

I have sold the xenon's and are getting a standard set traded back this week.

Then the car can go to compliance.

Once complied the parts then can come off.

So in approx 3-4 weeks.

Need to talk to Alex about full front sale, before I start splitting up the front to different people

Alex has agreed to buy the bonnet, both guards, headlights, high beam lights, front parkers

Front bar and grille and reo to suit (part of the centre section has been cut to suit the opening in bar) is still up for grabs

The front bar has got a crack on the bottom, will get some more picks, should notbe to hard to repair.

If someone really wants my front bar and grille and reo, you could trade your old with Alex.

You will need to make your mine up this week, as I will have/will be getting him a standard bar and grille this Saturday when I pick up some other gear from the Gold Coast.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...