Jump to content
SAU Community

Tapping From Engine Until Warm?

maximumrpm
 Share

Recommended Posts

maximumrpm Mentor

maximumrpm

Posted
Posted

Hi All

As most of you know, i had a bad front on and rid off my car, i final finished repairing it and when you start it up for the first 30sec - 1min there is a tapping sound, when the car gets warm the tapping goes away? any ideas? i was thinking it was the fan at first as the radiator was wrapped around it, but im not sure anymore?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/119421-tapping-from-engine-until-warm/
Share on other sites
Guilt-Toy Grand Master

Guilt-Toy

Posted
Posted

how long has it been since the engine has been running ?

Did you change the oil ? If so did you go to a different oil to what you normally use ??

If you have not had the engine running for a while the lifters are probly playing up. Get some lifta free from your auto parts shop and run that in with a new oil change and filter. Should fix the problem.

LatinR33 Experienced

LatinR33

Posted
Posted

spoke to mechanic bout this and yeah exactly what the guys have already said in here. Use a heavier oil, it goes away after a while because the oil level has to rise and lubircate parts something like this. If its still doing it while its warm and driving around and gets louder while accelerating then yeh thats a different story I believe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Rusty roof repair

      By PranK · Posted

      Some of the filler.   Also if I look under the top flap of metal it starts looking good quite close to the edge. I get the feeling it doesn't go much further.
    • PranK
      Rusty roof repair

      By PranK · Posted

      So, I finally started digging at the bit of my roof that was cracking and bulging a bit. Well, it was just thick filler that was covering some pretty bad rust. I didn't find the edges, I was too bummed to keep going.  There are a few holes as you can see. There was just so much filler but looks like no attempt under the filler to prime or use rust converter, just slapped filler on exposed rust.  Anyway, I'm going to take the windshield out and find the edges. I'd love to fix this myself as I'm pretty sure it'll be expensive to get done properly. I was thinking I could just get a cut piece from another E39 and just weld it in place as it would be the right size and shape.  Thoughts?
    • Kinkstaah
      r34 Skyline 25 Gt four GTR conversion (ENR34)

      By Kinkstaah · Posted

      This is the territory of the "Stage 1/2/3 Golf GTI/R" or otherwise off the shelf tune with (relative to before) minor mods. It's easier now. Downpipe and Tune and boom, big increases. Stage 1 OEM+ is where it's at. This is where the niche evolved into and it's really easy to see why. It's rare to even NEED to consider changing turbos or going to aftermarket ECU's or building bottom ends for more power. Stage 1-2-3 will get you a LONG WAY. Civic Type R turbo GR Yaris/Corolla Anything with B58 (MKV Supra/x40i) Anything BMW in General Anything Audi in General Any turbo AMG RenaultSport Turbo offerings Korean Elantra N/I30N Ecoboost Mustangs Focus RS? List goes on. I would argue in the future it won't even need to go on... M3P is pretty rapid out of the box...
    • MBS206
      r34 Skyline 25 Gt four GTR conversion (ENR34)

      By MBS206 · Posted

      There is a way, but it's not with the same cars. You need to find the same vintage of car, that we had. Realistically, that was an affordable car with aftermarket parts around. So what people need to find is a car that had a decent base in its day, and can be modified. They're looking for a car year make of 2010 to 2015 really... Aus could have done it if Holden didn't fold as V8 commodores were cheap, and if Ford didn't get expensive thanks to COVID, then you could cheaply play with FG Barras. Realistically, those are just a bit heavier, four door skylines. I'm sure the US and UK have similar cars they could find.
    • Predator1
      Ogura orc1000f vs Osg tr2cd vs Osg r3c experiences, max torque/max hp?

      By Predator1 · Posted

      Haha I do that.. thats when it chirps..The bit point for me is almost non-existent. Otherwise I stall it. But yes, in terms of performance, the clutch is solid af.
×
×
  • Create New...