Jump to content
SAU Community

Recommended Posts

Wow. it has neo rb25 ya? What mods you done?

year has the neo in it some mods are.

gtr eagle rods

forged racing pistions coated

bore out and honed block

new inlet manifole

kkr throttle body

all new race bearings

surfaceblock

complete cylinder head service

crankshaft polished

50mm radiator

the list just keeps going on and on.

too bad about that oil pump failure

the oil pump didnt fail the mechanic over in japan who put the engine together was the one who failed

after we pulled the engine out to repair the problem we noticed the oil pump was already upgrade with a CNC machined billet item

the backing plate which bolts onto the oil pump was lose, the bolts were all lose so this was the cause of the drop in oil pressure

we then pulled of the sump to inspect the bottom end bearings and noticed all the bottom end bearings were brand new and in perfect condition

we also noticed the crank was replaced with a R33 crank shaft as well

Nice kit laterz, different but nice. Thats the jun one isnt it, not sure ive seen another in aus

Thanks "2630GTS"...Ive never seen that kit before either!! I was hoping to see one on this site...so i know what kit it actualy is. the previous owner mentioned that it was a custom tommy kiara front bar...but i duno!!!

thankz abu..

haha yea u wouldve...wat u drivin??

where boutz u seeein me a millition times lol

Silver R32 man, theres pictures of it a few pages back

Most recently I'm sure I saw you up near Waverley Gardens shopping centre and I've seen you a few times around Dandeong/Cheltenham/Hallam area

Hallam Belgrave Rd a few times as well

Am I thinking of the right car?

Thanks "2630GTS"...Ive never seen that kit before either!! I was hoping to see one on this site...so i know what kit it actualy is. the previous owner mentioned that it was a custom tommy kiara front bar...but i duno!!!

Check out this link

http://www.junauto.co.jp/products/aero-par...2/index.html?en

Silver R32 man, theres pictures of it a few pages back

Most recently I'm sure I saw you up near Waverley Gardens shopping centre and I've seen you a few times around Dandeong/Cheltenham/Hallam area

Hallam Belgrave Rd a few times as well

Am I thinking of the right car?

nice neat tuff lookn car abu!!!

Edited by deadly32gtr

Thanks for the link!!!....f*k itz discontiuned...what do i do if i stuff up or ever damage my bar? lol

there has to be another source to get it....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Some troubleshooting, connect up a timing light/gun with a proper ignition lead on coil 1. Hold the revs at 4~4500rpm and see if your timing is all over the shop, scattering off its tits. If so, there's a high chance your CAS is fked. But I read you have a Link ECU ready to go in, why not just skip all this and put that in - will make troubleshooting so much easier.  
    • Misfires when the car is fully warm are generally attributed to the coils (and/or the igniter, on cars with a separate igniter). They can stop working properly when they get hot for a number of reasons. Either electric/electronic, or from thermal expansion opening up gaps and allowing HV leakage. Seeing as you have replaced the coils, that could/should rule them out. But I wouldn't always assume so. Were the coils genuine? Or is there a chance you have bought some counterfeit Chinesium shit? Then we're back onto loom connections. They can fail when warm/hot for the same reasons. Inspections, cleaning of contact surfaces, ensuring that terminals are fully inserted, etc etc, are all justified. The same (heat effects) holds true for the other electrics and their connectors. AFM & CAS, primarily. If you try that Chinesium AFM, drive it around on low load until it is properly hot, but do'nt give it more load than you have to, except when you need to see if it will still miss. I'm dead serious about the untrustworthiness of the calibration of those copy AFMs. Injectors are unlikely to get hot unless the fuel is coming back around hot. You could try squirting them with compressed air or freeze spray to cool them back down to see if they are maybe the cause.
    • Alright, all the plugs looks good. Noticed that it starts to get bad when the car is up to temp, that's when things starts to misfire hard. next to do is Injector cleaning and such. Got in touch with a shop to do work on the injectors next Monday also help on diagnosis.
    • House of Fatz dry dock needs a clean sadly one of the long time stables is leaving this weekend   see ya mr purple
    • Hence why I've only modified my car into a pure daily. Everything has to remain reliable & roadworthy, while providing value and grin factor. It also must not be handcrafted to the extent that the car will be immovable if something breaks because you cannot get or make a replacement to at least limp around with.
×
×
  • Create New...