Jump to content
SAU Community

Recommended Posts

Roy

I ran a 18 x 9.5 + 30 with a 245/40 tyre on the back.. was a tight fit and that's when I got the inner lip on the rear guards rolled. Just with the inner lip rolled it was enough to tuck the tyre under so no flaring was needed

I ran a 18 x 8.5 + 25 at the front with a 235/40 tyre but they didn't tuck under but I never had the guards rolled at the front.. Your probably running a bit of camber at the front so should be able to get them tucked in

Otherwise R33 LCA will give you like -3 deg camber, with the inner lip ont he guard tucked it should fit up fine

245 is the widest tyre I have had.. lol

I've had 10" +22 on the back before and wanted to stick to that sizing but I saw these on yahoo auctions and had to have them. the lip is rolled and the guard is slightly pumped plus I rolled them before it was painted so didnt want to go through that again on new paint

I was running 215/40/R17 on the front of my XD9s which were 17 x 9.5 + 17 and 225/40/R18 on the rear 18 x 10 + 18 :)

Some serious stretch

thats what im talking bout.. tyres that do yoga 5 times a week.

i had 235s on a 9.5 and thought it was a good stretch... took my "mate" at the tyre shop 15 goes to get one on.. he wasnt too happy when i came in 2 weeks later to get them replaced. haha

post-24581-1227431813_thumb.jpg

Man, you guys all freak me out with the size wheels you are jamming in under the GTSts. I want to run a 9.5" , maybe 10" rear but only because i want to run a 265 rear tyre :down:

Anyway, the car has 9" +20 offset which should be doable and when the guards have been pumped for that sized rim i should be able to get a 9.5" + 36 on the rear aand run 255 tyres.

Is anyone running wide rims with decent sized rubber?

Roy, i've got 19" x 9.5" +38 with 265/30 tyres on my 32 GTST.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...