Jump to content
SAU Community

Recommended Posts

depends on how much work you want to do to get it, the best way is to take off the resonator box and run a pipe straight from the throttle body to the air flow meter then to a poddy this will make a really nice suckson roar, although there has been some thoughts that you will loose power from doing this as supposibly the resonator box aides your power or something, but i found that when i did this to mine the throttle responce seemed a lot better a power seemed the same or mabye a litle more but ey might have been my brain playing tricks, i dont know if anyone has done dyno trials but ey ask around someone knows more than i do

Link to comment
https://www.sau.com.au/forums/topic/119941-air-filter/#findComment-2211268
Share on other sites

Go here for a listen to mine.

http://homepages.paradise.net.nz/jswright/screamin.html

It's a UNIfilter and custom intake pipe as unarmed is talking about, it ran 120rwkw with this set up.

I've recently changed to a Blitz Superpower LM filter, because it is a dry filter and I was sick of cleaning my air flow meter, and I have lost a little top end and all of the scream! Going to put the UNIfilter back on for competion and use the Blitz for day to day driving...

Edited by screamin'
Link to comment
https://www.sau.com.au/forums/topic/119941-air-filter/#findComment-2213864
Share on other sites

either take the snorkel off the factoy box and run a good filter, like a k&n, or get a pod. both will create a deep noise. i had a pod on my 6 sylinder falcon and it sounded like a stock v8. then i had a 2000 magna with a 3.5l v6 and with the snorkel off and a k&n panel filter it sounded beefy. doesn't seem to work on commodores though, but it was an auto and all the rest were manuals. a pod will make more noise than a panel with the snorkel off. to get a rough idea of what it will sound like, take of the front of the airbox and take out the filter and rev the car suddenly. just make sure there is no crap around the airbox that could get sucked in.

Link to comment
https://www.sau.com.au/forums/topic/119941-air-filter/#findComment-2214056
Share on other sites

depends on how much work you want to do to get it, the best way is to take off the resonator box and run a pipe straight from the throttle body to the air flow meter then to a poddy this will make a really nice suckson roar, although there has been some thoughts that you will loose power from doing this as supposibly the resonator box aides your power or something, but i found that when i did this to mine the throttle responce seemed a lot better a power seemed the same or mabye a litle more but ey might have been my brain playing tricks, i dont know if anyone has done dyno trials but ey ask around someone knows more than i do

The resonator in an OEM airbox is to smooth out the airflow. For some reason its especially bad on NA cars, but at a certain speed the air being drawn into the intake causes weird airflow through the pipe. This screws your AFM's reading, which can kill power and will definitely cause strange noises to come from the engine.

My engine makes a great induction roar, but then I've got a pod filter using minimal heat shielding going into a pipe that's only got 1 bend to the intake manifold.

Link to comment
https://www.sau.com.au/forums/topic/119941-air-filter/#findComment-2214582
Share on other sites

hey scathing, i've had no wierd noises comming from my engine n the airflow seems fine, i think though sometimes it does struggle to find idle when you are sitting at the lights or whatever, but otherwise no probs, the car runs 15.5's down the 1/4 with the induction, a cat bak 2 1/4 mandral bent zorst n a heavy duty clutch, n it has a heavy arse body kit on it, so i can't c the resinator taking any power from the car

Link to comment
https://www.sau.com.au/forums/topic/119941-air-filter/#findComment-2223330
Share on other sites

Yeah im getting an apexi duel somethign or other pod air filter, id like to get a pipe tu run from the motor direct to the pod filter. Does anyone know where i can get this in brisbane or someone in brisbane that can custom make it.

And to the guy who said it was making to much noise so he took it off, i hope myne makes all the noise that it can.

Thx

Everyone

Link to comment
https://www.sau.com.au/forums/topic/119941-air-filter/#findComment-2227261
Share on other sites

Sorry about the noob questions (ur all prolly gonna laugh): what is the different between a pod filter and air filter?? and which ones better

AHaha im a noob and you make me look good lol. A pod filter is a type of air filter. Just like a panel filter. Its just the shape of the filter that gives it the name, go to google, images, and type pod filter.

Link to comment
https://www.sau.com.au/forums/topic/119941-air-filter/#findComment-2240139
Share on other sites

so whats the best one to get? HKS, K&N or apexi? i also want the swoosh noise :D

Try this: http://www.skylinesaustralia.com/forums/in...howtopic=119448

A'pexi filters best, but it's horses for courses. 'swoosh' doesn't nessecarily equal good filtration, so which do you want more, noise or engine longevity?

Link to comment
https://www.sau.com.au/forums/topic/119941-air-filter/#findComment-2252493
Share on other sites

hey scathing, i've had no wierd noises comming from my engine n the airflow seems fine, i think though sometimes it does struggle to find idle when you are sitting at the lights or whatever, but otherwise no probs, the car runs 15.5's down the 1/4 with the induction, a cat bak 2 1/4 mandral bent zorst n a heavy duty clutch, n it has a heavy arse body kit on it, so i can't c the resinator taking any power from the car

15.5? i dont think that is a good thing as i did my first ever 1/4 run and got 15.9, the car is stock, have you had the car dyno tuned after you got the mods? would probbably be good idea. What induction kit have you got?

Link to comment
https://www.sau.com.au/forums/topic/119941-air-filter/#findComment-2272343
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...