Jump to content
SAU Community

Recommended Posts

Hi Everyone.

It has been suggested that a vacumn leak may be causing some stalling problems with the R33 GTS-T's.

Does anyone know how to check for a vacumn leak, or where I should be looking to see if there is any signs.

I've search for a thread that may have covered this but I couldn't find one.

If there is, please let me know.

thanks guys.

Link to comment
https://www.sau.com.au/forums/topic/12058-vacumn-leak/
Share on other sites

Ive just recently taken my intake off and re gasketed it due a vacum leak it did not seem to work my idle actually surges up and down i dont know weher it is a vacumn leak im wondering if it is possible for a power steering issue could cause the surge any way we seem to be in the same vote please tell if you find any thing out and how could smoke work on a vacumn leak do you hold externally

Link to comment
https://www.sau.com.au/forums/topic/12058-vacumn-leak/#findComment-219192
Share on other sites

Try using water. This is done by getting one of those trigger pump bottles,fill it with water,spray it over inlet manifold ,vac hoses,injector seals ,throttle body or any where there is vacuum.With the engine running,the water is sucked in and momentarily makes the engine run rough.Bingo, vacuum leak found!! Also make sure all connections to the turbo ,intercooler etc are tight.

Link to comment
https://www.sau.com.au/forums/topic/12058-vacumn-leak/#findComment-219716
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...