Jump to content
SAU Community

Recommended Posts

6x r34 gtr Vspec conrods less than 25,000k's use removed from working engine. $350.

6x gtr rods age unknown $300 for the set will seperate.

2x R32 GTR Turbo's in perfect working order no damage $150 each sold

post-9985-1152457941.jpg

post-9985-1152457971.jpg

post-9985-1152458034.jpg

post-9985-1152458062.jpg

3x damaged r32 gtr turbo's 2x exhaust wheel damage 1x exhaust shaft snapped. $30 each

post-9985-1152458185.jpg

post-9985-1152458196.jpg

post-9985-1152458207.jpg

3x R32 GTR Dumps standard $10 each

Atmo bov $50

post-9985-1152449901.jpg

R34 GTR Diff Centre and Output Shafts $800

post-9985-1152450010.jpg

Old School 6 point saftey harnes pair. (brand new never used munufactured 1992) $100

post-9985-1152450188.jpg

post-9985-1152450209.jpg

R33 GTR Tail Lights pair $150

post-9985-1152450391.jpg

R33 GTR Rear Tower Brace $100

post-9985-1152450452.jpg

R33 GTR Rear Interior (rear seats side panels) $600

post-9985-1152450579.jpg

post-9985-1152450594.jpg

post-9985-1152450610.jpg

R32 Rear Bumper $70

post-9985-1152450672.jpg

R33 (gtr) Antenna and motor $70

post-9985-1152450758.jpg

R33 (gtr) Rear Bumper, Bumper Support and Skyline pannel $150

post-9985-1152450834.jpg

R33 Seat Belt Set of 4 ADR Approved Belts $100 Per pair $200 fullset

post-9985-1152450908.jpg

RB20 Head working perfectly with covers no coils $300

RB20 Short motor PERFECT Bores and bottom end no sump $300

Rb20det Tomei ECU $450

2x 5 dial SAFC's $100 each. (sold)

post-9985-1152719203.jpg

post-9985-1152719228.jpg

pair of alcon calipers $800 PN: AL6346A306J CAL6346A306F

post-9985-1152719431.jpg

post-9985-1152719451.jpg

post-9985-1152719470.jpg

Edited by driftstore
Link to comment
https://www.sau.com.au/forums/topic/121159-gtr-rb26-assorted-parts/
Share on other sites

  • 1 month later...
  • 2 weeks later...

can you Pm me more pictures of calipers, preferably the inside and mounting blocks. do you have model no's and piston sizes, hole distances, pads part no, history, etc, etc.

thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
    • Regardless of neglect or incompetence, fixing either is tedious and annoying. Most of the neglect on my car is definitely rust. I hope I can at least pass inspections later on and they won't fail the car due to slightly corroded hardlines. I was generous with rust converter and wax and it looks ok, most lines in the rear are hard to see properly anyways.  Definitely will test them though to make sure they don't rupture under pressure, in that case the car isn't going anywhere this year.
×
×
  • Create New...