Jump to content
SAU Community

Recommended Posts

Hello everyone,

Just pulled a turbo off my R32 4 door. Need help in figuring out what it is so I can sell it for the right price. My guess is it's a high flow of some kind, steel wheels etc

It has a GCG plate on it:

S/N: 016085

P/N: XTRGTSTS1

The compressor housing is labelled 16V 12 (I think thats the standard housing for an RB20 turbo, correct me if i'm wrong?)

Exhaust housnig doesn't give away much. Near the inlet it says 603A, and randomly somewhere else it says OP6. Has a pretty big exhaust wheel.

Here's the pics. Sorry they're abit dark, couldn't get much light.. will try for some more tommorow!

post-25779-1149843655.jpg

post-25779-1149843677.jpg

post-25779-1149843735.jpg

What do you guys think?

Link to comment
https://www.sau.com.au/forums/topic/121631-what-turbo-is-this/
Share on other sites

The turbine housing is the larger VG30/R34 size.

It must of been laggy on the ol RB20. >_<

The comp cover is from an rb20det turbo.

An interesting match, small 16v comp cover with the vg30/r34 turbine housing.

How did it spool on the rb20det? Al lin by 5k?

As stated, its a GCG highflow, ~$1900 new.

The only negative with your turbo is the small 16v comp cover.

The turbine housing is the larger VG30/R34 size.

It must of been laggy on the ol RB20. >_<

The comp cover is from an rb20det turbo.

An interesting match, small 16v comp cover with the vg30/r34 turbine housing.

How did it spool on the rb20det? Al lin by 5k?

Haha spot on mate.. not too good for mid range, but jessu christ hold on once you hit bout 4.5k

Made great top end power. I think it would go well on an RB25/RB30

Haha spot on mate.. not too good for mid range, but jessu christ hold on once you hit bout 4.5k

Made great top end power. I think it would go well on an RB25/RB30

I think it would too. :nyaanyaa:

What power did you end up making with it on the rb20? 4.5k is not too bad. :)

I ran a stock vg30 on my old rb20det once, that had bugger all under 4000rpm. Such a lazy turbo for bugger all power increase over stock. >_<

from the tag

GCG

GTST turbo

Stage 1 Hi-flow,

Its not the surgy (and now removed) "2nd stage" they had on offer for a while

I thought as much from the plate on the turbo. Is it ball bearing?

So the big question is what is she worth? No shaft play, and it will come with a 15psi actuator..

Sorry for the multiple posts, but I did abit of digging on GCG.com.au, and found this:

http://www.gcg.com.au/Catalogue_Menus/Upgr...pgrade_gtst.htm

Thats basically what I have, instead I have the 16V 12 compressor housing (R32) not the 45V2 (R33) housing.

$1950 brand new.

Shit, 1300's a good price. I had no interest at that price for mine.

I ended up getting 1000 or 1100 i think for my old stage 2 highflow (which incidentally didn't surge on either my rb20 or rb25)

The problem becomes you now have competition from new garretts at about $1300 not to mention the sub 1k highflows from slide.

haha great this thread has also answered my question to what my turbo is :ermm: i think everyone will agree its a new GCG high flow, numbers etc. match except mine has '45V4' and the one on the GCG site has '45V2'.

GCG: http://www.gcg.com.au/Catalogue_Menus/Upgr...lineTurbo_1.jpg

Pics of my existing turbo:

post-5020-1149954891.jpg

post-5020-1149954902.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for all the replies fellas. Gonna finish putting it back together and see how it handles the set up. If it starts pinging it’ll be parked.
    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
×
×
  • Create New...