Jump to content
SAU Community

Recommended Posts

Hi,

I would also like to know this, and with what ecu they are running and what mods they have done to the auto.

Are you running this much power, is this the reason for the question. Id say it would be a high 11 sec car if it was set up correctly with a hi-stall converter and decent tyres and suspension.

Sorry I was of no help, its just I have an auto r33 rb25det in build.

Cheers

There's a few in the UK with over 250rwkw but I don't know of any that are over 275rwkw (without using N2O)

Why do you need N2O?

I have RB25det, tomei cams, head porting, wolf3D ecu, HKS GTRS@18psi and intend to get over 275rwkw. You don't need to have a big laggy turbo to reach this target.

yea im at 275 kws

pulls like a train.

if you like doing burnouts it changes 1st, 2nd, into drive then you can just play with it in drive.

crazy smoke from the 17's

over 200kmph on the spot.

auto just has a MV shift kit, and a large trans cooler.

and im running a power fc

i have a series 1 r33 auto so i cant comment on series 2 or any other type of auto.

but with the series 1 you buy a power fc , you plug it in, and you drive it.

its that simple

all the tossers on here that tell you it wont work all drive manuals and have never ever tried

it, or even been in a auto r33.

so for all those auto r33's out there, get onto greddy from here, and order a power fc from his group

buy and enjoy..

safc etc are shit.

plug in a power fc and never look back

Power FC works with all skylines that have a seperate Auto computer, R34's have their one integral with the ECU, so if you put a power FC in, it doesn't have the auto control attached. The R34 25GT however does have a seperate ECU that can be wired in and then you can run a Power FC on a GTT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...