Jump to content
SAU Community

Recommended Posts

hi i am interested in buying this manifold

one of the reasons why my engine blew was because the stock manifold was leaning out #6 so my next build up, i don't want to have the same problem

will this be solve the problem?

have anyone dealt wiht this guy

how are these ebay manifolds ?

thanks

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...TRK%3AMEWA%3AIT

MANIFOLD_RB26_MAIN.jpg

MANIFOLD_RB26_inside.jpg

MANIFOLD_RB26_inside3.jpg

MANIFOLD_RB26_HOLE.jpg

MANIFOLD_RB26_hole2.jpg

There is more to the #6 leaner issue than airflow, it is also the hottest running cylinder. It is the furthest from the water pump, it is the furthest from the oil pump, it gets the hottest air flow etc etc.

What we do is tune the primary pipe temperature so they are the same. Put the highest flowing injector in #6 and then trim the fuel in all the cylinders to give the same exhaust gas temperature.

I have yet to find a "perfect" inlet system at all practical boost levels, aerodynamics is like that.

:dry: cheers :wave:

Nah... flow testing the injectors before u stick em in.

They are never perfect. One will flow more than another.

So, you put the highest flowing one in the rear :dry:

Then there is tuning stuff, which someone else can input as im not sure on it.

Or you could go dual entry fuel rails. They have been debated in the past (search button for that)

We are already tested on of our customers drag racing cars, these car are 1000++ whp. These cars run fine on very high boost(2.5 psi) no air leak, no crack on our manifold. If you are looking for very best quality manifold for your engine this is the one.

dont you just love dodgy ebay.. if your goin to buy a intake.. spend the money on a decent brand named one.. not a dodgy ebay one :

Edited by rb26s13

haha, yea i thought that was kinda funny..."if u want the best, this is the one" then you wonder why they sell for 1/4 the price ... hahhaha

so what happens if i get new injectors, shouldn't they all be the same ?

do you suggest i flow test the new injectors ?

thanks for all the help guys

Nah... flow testing the injectors before u stick em in.

They are never perfect. One will flow more than another.

So, you put the highest flowing one in the rear :(

Or you could go dual entry fuel rails. They have been debated in the past (search button for that)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...