Jump to content
SAU Community

Recommended Posts

I have been invited on the Porshe drive day next week.The idea

of the day is to introduce people to the different models available

& also to meet other people interested in them.They have a selection of Boxters, Boxter S, & 911 coupe & cabrios.(No turbos though - spewin - I've driven one & they are awesome). Will spend the whole day in the hills with a spotter out front on the lookout & get to drive all the different models - should be fun.

This got me to thinking though.When we go on cruises, we drive our own cars & usually take our own passengers for the whole cruise.I am not suggesting that we swap cars but I thought it might be fun to swap the passengers around at intervals so they get a chance to experience the different cars & also get to know the drivers a bit better.Some of the drivers might even like to let their close friends drive their cars a bit & then they can go for rides in someone elses car. Of course social events where we are not cruising would be cool - but this way we can really check out each other cars a bit better.I know there are a couple of Skylines which are often sideways that I would like to go for a ride in!

this idea would have to be properly organised on a decent day cruise so intervals could be fair & everyone gets at least a couple of rides in a different car & may not work if everyone wants to go in the same car, but I thought I would put the idea out there & see what happens.

BTW - the LS1 cruise to Ayers rock is on over Easter.

Whats the plan for the 28th March cruise?

Link to comment
https://www.sau.com.au/forums/topic/12197-porsche-drive-day-thurs-20th/
Share on other sites

Good idea John, I reckon im gonna get some "P" plater in my car up the hills to see how long before he slams the wall :]

Nar thats the sorta thing that might keep ppl interested more. So when u handing me the keys ? EH HE

Sounds good as long as ppl treat the cars with respect like they should.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
    • I wanted to try and preserve the front bumper as long as possible, they're not cheap and are made to order in Japan. Taking inspiration from my previous K11 Micra build where I made an undertray for the Impul bumper, I did the same for this BN Sports bumper but a little slimmed down.  This time round I only made a 'skid plate' (if that's the correct wording/term) for just the bumper surface area, the Micra version covered the gap like an undertray. Starting off with a sheet of mild steel approx. 0.9mm thick 4ft x 2ft in size. I traced around the bumper, cut it out and cleaned the edges. Luckily I was able to get two halves from one piece of metal In the video I installed it as is, but I've since then I've removed it to spray and add a rubber edging trim. The rubber trim is suitable for 1-2mm and it's a really nice tight fit. The bolts had to be loosened due to the plates being too tight against the bumper, the trim wouldn't push on I used some stainless M6 flat headed bolts for a flusher finish (rather than hex heads poking down), I believe this style fastener is used for furniture too incase you struggle to source some. The corner's are a little wider, but this may be an advantage incase I get close to bumping it  The front grill got some attention, finally getting round to repairing it. Upon removal one fixing pulled itself out of the plastic frame, one side is M8 that fixes inside of the frame, where as the other side is M5. Not knowing I could get replacements, I cut down an M8 bolt, threaded it inside the frame along with a decent amount of JB Weld.  The mesh was replaced to match the bumper. One hole on the bonnet/hood had to be drilled out to 8mm to accommodate the new stud, once the glue had set it could be refitted. I think the reason the grill was double meshed was to hide the horn/bonnet latch (which makes sense) but I much prefer it matching the bumper Bumper refitted and it's looking much better IMO The Youtube video can be seen here: https://www.youtube.com/watch?v=bVZP35io9MA
×
×
  • Create New...