Jump to content
SAU Community

Recommended Posts

Hey guys,

A few of us from around Hornsby are meeting up tommorrow night for a bit of a drive.

Meet - Mt Colah Maccas 7:30pm

Heading down Bobbin Head towards St Ives and then onto towards McCarrs Creek Rd - grab a bite to eat and head back.

Wont be a late night, just a bit of a fun drive.

Anyone interested?

See you there!

:D

Chris

Link to comment
https://www.sau.com.au/forums/topic/122378-friday-night-16th-june/
Share on other sites

If I'm around / not still at work I'm a maybe

Might take the highway though my car dosen't seem to stick to those roads too well...

Ricky!!!

Thats cool mate - We can wait for you!!

just wait for us though at the end of bobbin head road ok??

:devil:

You know you want to James :ermm:

:thumbsup:

f**k I'm even more pissed off now.....james just made the car the way he wants it and was starting to reall enjoy a good thrashing... makes me so sad!

james if you still wanna come, you can ride with me... it'll be better getting out and getting your mind off it!

It was a pretty nice clean run, for the bits I did make. It was a good night for it - all that cold made for great throttle response.

I don't think I bottomed out through McCarr's Creek Road, which would be a first.

yeah it was a good nite its a pitty more of the sau's dont come on them.

i love our little hornsby cruises... I've got some good mates I usually cruise with.. although haven't for a while... i should call them out one day for a run!

yes Liz, yes you should

Also - I've got a few mates with other cars who are keen, a good mate of mine in a VU SS 50 ute - this thing...well....its blindingly quick and the handling - 2nd to none. another mate with a 500hp 300zx, just to name 2 :)

My new brakes and suspension is going in to the car this week, so if there's another run on this Friday I'm keen, but I'll be taking it at the same pace as last Friday whil I run the coilovers in.

Chris - some of the guys last Friday (your mate from Mudgee at least) has never done the Commenara Parkway. We should rectify that. :) Unfortunately there are houses facing on it, but its a lovely piece of road.



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...