Jump to content
SAU Community

Best Person/workshop To Work On Gearbox Of Gtr32....

J-Boy

By J-Boy,
in Queensland

 Share

Recommended Posts

J-Boy Mentor

J-Boy

Posted
Posted

Well i'm thinking of getting some work done on the gearbox of my gtr32, maybe putting in OS gears and dropping in new synchros and etc, anyone here can recommend some workshops/mechanics who are good with gearboxes and charge reasonable prices?

By the way, can anyone tell me if it's possible to drop in a GTR34 gearbox into a GTR32 without too much hassle? As in will the clutch need to be changed as well or other parts need to be changed when a GTR34 gearbox goes into a GTR32?

MountainRunner Mentor

MountainRunner

Posted
Posted

I think I read an article in a recent ZOOM magazine that said it wasn't worth the hassle as the R34 gearbox is no stronger than any of the others. Your probably better off going with plan A and putting tuffer running gear in the box you have now.

dangerous_daveo Grand Master

dangerous_daveo

Posted
Posted
I think I read an article in a recent ZOOM magazine that said it wasn't worth the hassle as the R34 gearbox is no stronger than any of the others. Your probably better off going with plan A and putting tuffer running gear in the box you have now.

No but its a hella lot newer isnt it.

The Dan Grand Master

The Dan

Posted
Posted
well if your actually after someone to rebuild your gearbox, or at the very least give you advice on its condition.

get hold of gabba gearboxes in ashmore on the goldcoast.

they have been recomended by a few workshops.

I thought they were in Woolloongabba. Do you know if they have moved or do they have multiple locations.

They are quite good and do many of the strong RB box rebuilds out there.

BelGarion Grand Master

BelGarion

Posted
Posted

it would appear that there are 2 of them with the same name but it does not appear that they are linked.

i took my last 33 gtst box to them for apull down and inspection on the coast here, but decided to go for a 2nd hand box with a warranty, only trouble is, just outside of 12 months this one has let go as well.

but yes i did think it was strange they were on the coast with a name like gabba gearboxes

http://www.gabbagearboxes.com.au/

fsmout Collaborator

fsmout

Posted
Posted

I have heard that charlies is getting new R33 GTR boxes for around the $3500 landed...with transfer case etc?? the later getrag R34 GTR box is supposed to be better i thought than the standard GTR box, not to sure...but they are prob as expensive as getting a PPG dog upgrade or an os gearset?? My friend had his PPG dog upgrade installed at charlies and now godzilla MS look after it. I think that Godzilla MS might know somone?

i think that on late model R32's the cluch mechanism changed to be the same as the R33's and R34's (push or pull cant remember) so there is little modification required....if it is an early model R32 then there is some modification required, but i dont think its anything to major.

Cheers,

Francisco

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...