Jump to content
SAU Community

Recommended Posts

just curious about O2 sensors on a GTR, do i have to buy genuine nissan ones or i can get aftermarket ones? and what aftermarket ones can i get to make them work?

no u dont have to run geniune ones

i see you are in brizzy give brisco butler a ring there located in windsor they deal with all auto electrial

stuff and they will supply u a bolt in replacement ones

frank price varies a lot depending on where you go. As cliche as it is, a searcg would reveal a lot of threads about replacement O2 sensors for RB26s. It seems that the EL Falcon sensor is only good for RB25 or something like that - you most certainly can use an aftermarket one but you'd have to search to find a part number.

For what it's worth mate :yes:

i just replaced the sensors in my 32 GTR last week and got them from global efi, they are vl commodore items, u just need 2 replace the plug on the rear sensor with the orig 1. thats if the 33 is the same???

r32 and r33 have different oxygen sensors.

r32 is itanium and r33 is some other format.

front and rear sensors have different plugs in both models i believe.

r33 gts/gtst can use falcon el sensor, its just a generic 3 wire 02 sensor but its easier to ask for ford falcon el than R33 gtst at your local parts dealer.

nowadays its not such a big problem. NGK website has part #'s for BNR32 sensors with matching plugs

the gtrs have the same sensor, made of the same material

Having the same problem, hence why i started my own thread!!

Just to clear things up. Both R32 and R33 GTR's use a sensor made out of titania. Both use a three wire plug and both have a voltage range of 0 to 1 volts. This is why the Power FC is generic for both in regards to the O2 sensors. The ONLY difference is the thread size of the sensors.

R32 GTR: 12mm thread

R33 GTR: 18mm thread (spark plug thread)

Now, both use the same plug formats as well i believe, which differ from the front one and back one.

The factory serial numbers (genuine nissan) for these items are:

R32: Front - 22690-05U21 (Flat 3 wire plug)

Rear - 22690-05U22 (Square 4 pin plug)

Alternatives - front - NTK OTDF-P1P

rear - NTK OTDF-P1L1

R33: Front - 22690-24U02 ($209 from Metro Nissan Brisbane)

Rear - 22690-24U01 ($212 from Nissan)

So as you can see, buying genuine nissan is just being A$$ raped, hence why i am looking for alternatives.

Tony

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
×
×
  • Create New...