Jump to content
SAU Community

Recommended Posts

benm, you can get SPEED FLOW braided lines and fittings from STAR PERFORMANCE in Regatta Rd Five Dock. speed flow pricing is a lot less than EARLS, its as good or better than earls, and oz made. go mad with it, but make sure it cant rub on anything. it can be quite abrasive on softer items, like radiators.

dave

nice.. although i don't like the chances of it not scratching too easy - now you can't work on your engine... ever :D

wonder whether the hoses can do with just normal spray paints?? as you can get a wider range of funky colours rather than the high temp stuff. For rubber hoses and things I reckon it could be fine (where if they melt i'd be kinda concerned about the heat anywayz). One day i give i'll give it a try...then i start sanding and polishing some metal bits.

my interior is coming up nice with some touches of cherry red..then i gotta get to the brake calipers and spray them now they're visible.

um...http://www.ryco.com.au/ looks to have a massive selection. for those in melbourne its in footscray. I'd say they'd have everything and anything you'd want from looking at their catalogues. gotta pay them a visit one day too.

Originally posted by predator666

For rubber hoses and things I reckon it could be fine (where if they melt i'd be kinda concerned about the heat anywayz).

You're not talking about painting rubber hoses are you!? If you are it'll be a total waste of time. The rubber will tend to flex (not much but it won't take much!) & most paints don't handle being flexed. And you can forget about ever removing the painted rubber parts if you don't want the paint to crack straight off.

i did a test spray and it seemed to stick pretty well to the bit of hose i had sitting around ... but that wasn't in the car with the heats associated.. true, you don't want bits of paint flecking off - maybe i'm wrong. i'm gonna spray that sucker more then bend it to shittery and see what happens as a test.

Guess silicon hoses are the real solution.

I didn't use any primer or clear just about ~3 coats of gold and it seems to be sticking fairly well.

I mean once everything is back together its only subject to heat, nothing else.

But still i did a bodge job (first time playing with an engine and not exactly a painting expert) and i think my results (close up) reflect exactly that.

If i did it again i'd let everything dry 3x longer and use primer etc etc.

Geez youre engine bay looks sweet now Matt (whatsisname) I really think that is the best engine bay Ive ever seen!

I plan on doing the vaccuum hose, paint and a few other things on my GTR very soon. First im focusing on the metal parts (rocker covers, plenum etc) being polished to a mirror finish. Got half that done. Then will move on to the hoses etc...

I reckon matt, maybe you should have a go at getting the rocker covers and plenum polished up to a mirror finish. That would just top it off.

Do you reckon you could give some of us some tips on doing the engine bay up from scratch? Like where and what to buy, how much we are looking at?

thanks mate,

Andrew

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...