Jump to content
SAU Community

Recommended Posts

Hey,

I'm looking to purchase a set of Nismo LM GT3 rims that are 18''x9'' with +26 all round for tyres....

I am very curious to know if they would fit under a 1993 Nissan Skyline R33 GTS-T...

I am far from being the most technical person so basically i am wondering if they would fit if i had the guards rolled or they are just to large to fit under the wheel wells even if they are rolled?

Are the Stud patterns the same?

Would my camber be destroyed if i put them on or is it a direct bolt on?

If camber is destroyed where and how much would i be able to find a fully adjustable camber kit to make them work?

Help on this subject would be awesome so i know whether to purchase them or not...

Please help me out...

Thanks...

Jake

post-25223-1150535873.jpg post-25223-1150535892.jpg

Edited by jakegts
Link to comment
https://www.sau.com.au/forums/topic/122627-r33-rims/
Share on other sites

They will of course bolt on, which will be great for photos but driving will be another issue. Being GTR wheels, they're deigned to fit under much wider guards and fitting these onto a GTS25t will have them hanging out the guards by at least 10mm meaning guard clearance issues. There may also be issues with the rim width of 9" (not sure), you'd be better off getting something more suitable that won't give you a headache and burn a hole in your pocket at the same time (despite looking awesome!)

Maybe check out 350Z or Maxima wheels.

Wheel selection won't alter your camber, good luck.

Link to comment
https://www.sau.com.au/forums/topic/122627-r33-rims/#findComment-2266309
Share on other sites

I have already purchased new front guards that are wide body (20mm wider on each guard)... So i hoping the front will be fine but i am more concerned about the rear guards...

Will they fit flush or will they be hanging out the sides? (even if the guards are rolled, and being that they are 9'' wide)

Or even worse rubbing on the interior guard or undertray and destroy the rubber...

Please post up again once this is read as i am quite eager to get them...

Any help would be much much much appreciated...

Link to comment
https://www.sau.com.au/forums/topic/122627-r33-rims/#findComment-2266466
Share on other sites

the best thing about the r33's is you can fit whatever width wheel/tyres you want (within reason ofcorse). you shouldnt have any clearance problems with standard rims and tyres from another car. i had 19x10's on the rears and they were fine.

this is a pic of my car jacked up on these rims.. they sat fine:

DSC00505.jpg

Link to comment
https://www.sau.com.au/forums/topic/122627-r33-rims/#findComment-2267310
Share on other sites

Also, what size tyres should i be thinking about getting?

The seller suggested that i change the existing tyres from 265's to 235" or there abouts...

Will it make a dramatic difference if i do change them or will it be fine if i stick with the 265's for a while?

Link to comment
https://www.sau.com.au/forums/topic/122627-r33-rims/#findComment-2272095
Share on other sites

I'm in the process of fitting 17x9's with an offset of +22 to my gts-t and yeah as someone said.. burning a hole in my pocket.. but i love the rims

I'll be getting camber kits to help out a bit and flaring the guards, we'll see how it goes then. Haven't seen the rear on but the fronts stick out like nothing else.

But I say, the main problem is just the fronts and you have wider guards for them.. so just do it! Maybe look at flaring the rear even if you don't need it so it doesn't look so odd with fat front guards!

but yeah i say DO IT!

Link to comment
https://www.sau.com.au/forums/topic/122627-r33-rims/#findComment-2273395
Share on other sites

my 19x10 fix without any camber kit or anything.. heres a pic of it the moment i got them on my car... it looked like a 4wd but they didnt rub which is the important part. if you dont want to fork out money on camber kits or whatever, just lower the car according to how much space you've got.

rimss.jpg

Link to comment
https://www.sau.com.au/forums/topic/122627-r33-rims/#findComment-2276354
Share on other sites

Thanks for all the help from everyone...

Ok, to afford the LM GT3 Nismo rims i will have to sell my current rims, they will be posted in the for sale section but i thought it appropriate to put them in here also...

Price : $1600

They are 4 x DOLCE DC-6's that are 19'' x 8'' (Fronts: WANLI S-1099 245/35 75% Tread... Rears:FALKEN AZENIS ST-115 245/35 80% Tread )

post-25223-1151285017.jpg post-25223-1151285071.jpg

There are 1 very small mark on a Rim from when a car has kicked up a stone...

post-25223-1151285124.jpg

(not the long grey cord, that was from digital camera, about a cm to the left is a tiny mark, sorry bout quality but was best i could do and it really is a tiny mark)

Would have to be local pickup only too sorry, would not know where to begin to ship rims off to another place... Local pick up would be Wollongong or the Illawarra area...

The rims are perfect and look outstanding on Skylines... If interested please PM me or Leave a msg in here or in for sale section or msg my phone on 0421 545 240

Thanks... Jake

Edited by jakegts
Link to comment
https://www.sau.com.au/forums/topic/122627-r33-rims/#findComment-2284845
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...