Jump to content
SAU Community

Recommended Posts

yes it would be but this is turbo designed for rb thats why i have a custom manifold

but the manifold in the pic is a T2 flange? is that not the manifold you are selling? can i have another pic of turbo and manifold clearly showing the exhaust flanges

thanx

dan

ok guys ill tell you the deal even though the turbo is now sold,

ok my friend first bought it from japan with the rb housing already on it brand new in box just as it is now. Then i did some work for him(im an Architect) for free. so because he decided not to use it as he opted to stay with standards for some reason :( i got it and as i used to have an sr cefiro. i thought ' y not get a custom manifold made up so i can stick it on the ceffie' so i then proceded to get one made with witch i thought was a t3 flange but apparently wasnt. and alas before the manifold was built i had to sell the ceffie so when i got the manifold i decided to sell so i put it on here. and me being the stupid kind never thought to check the flange on the manifold to see if it was a t3 for the turbo. So the other day i though i mite try n fit the turbo to the flange just to see if it really was, as at that moment i too was having my doubts. and guess wat no fit so im now in the process of tying to get my money back of the fabricator of the manifold :P so the manifold is not for sale any more. and the turbo is sold to wild33gtst so can a moderator please close this thread

' date='21 Jun 2006, 05:43 PM' post='2274490']

the turbo is for an sr20..

look at the face of the turbo.. its made so that the stock sr intake pipe bolts straight up to it

it wont fit an rb20/25

:P

i didnt quite wana be so blunt, but yer SR turbo.

wonder who the sucker was that bought it and if they thought it was an RB turbo.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...