Jump to content
SAU Community

Recommended Posts

The guy I bought my car off gave me an FMIC and piping. I got some free time in the next few weeks so I want to attempt to put it in myself. I have access to all the tools (and I don't mind buying a few if I need to) so that shouldn't be a problem.

I havn't had a chance to take my front bar off yet to have a look where everything fits yet... I'm not even sure if I have the entire piping set :(

post-28866-1150787268.jpg

post-28866-1150787327.jpg

The longest pipe has a nipple welded onto it and a spot for a BOV. I'm not entirely sure whether I need to use it. The stock IC already has piping to the front corner of the car, can I just extend that to the new IC and not worry about the huge pipe?

Also, what does the FMIC mount onto? Am I going to have to fabricate something to hold it on or is there a standard mounting for it?

Last thing, if is gonna fit with the standard front bar?

I still have the air conditioning radiator installed (though it doesn't work :P) so I'm a little worried I might need to cut into the front bar to get it to fit.

The car is a 1993 R32 GTS-T type M

Any pearls of wisdom would be greatly appreciated.

Cheers

-Matt

Link to comment
https://www.sau.com.au/forums/topic/122997-fmic-install-tips/
Share on other sites

that looks like a custom IC of some description..

dont like how the lower pipe is like a semicircle rather than a whole pipe.

should be fine on std'ish car, but i wouldn't use it in high power app.. looks very restrictive :P

just my opinion though..

I got no idea what type of cooler it actually is. It has something written on the top so I'm guessing its not from a GTR. Its dark now so I'll look tomorrow.

The car isn't exactly high powered. Its stock except for a 3 inch cat back.

Could the cooler be worth selling and buying something else?

I have a mate that did his R32 who said he'd be able to help me out if I get stuck. I'd rather have at a crack at it myself... theres no better way to learning than by doing

It's not a GTR cooler - GTR cooler doesn't enter & exit on same side.

You will have to cut your front bar. I used a hacksaw & electric jigsaw - a stanley knife wasn't really do-able. Remember if in doubt cut less, rather than more as you can't go backwards after it's cut.

I cut a couple of aluminium strips from bunnings to mount onthe upper reinforcement bar to hold cooler in place - same for lower mounts. My cooler sits on an angle, the bottom of it is pulled in toward the car more if that makes sense - to align it with the natual angle of the bumper bar.

I took my time and proceeded carefully - it looks like a professional job and a bit of satisfaction from doing it yourself.

It's not a GTR cooler - GTR cooler doesn't enter & exit on same side.

You will have to cut your front bar. I used a hacksaw & electric jigsaw - a stanley knife wasn't really do-able. Remember if in doubt cut less, rather than more as you can't go backwards after it's cut.

I cut a couple of aluminium strips from bunnings to mount onthe upper reinforcement bar to hold cooler in place - same for lower mounts. My cooler sits on an angle, the bottom of it is pulled in toward the car more if that makes sense - to align it with the natual angle of the bumper bar.

I took my time and proceeded carefully - it looks like a professional job and a bit of satisfaction from doing it yourself.

Excellent job, did you have to remove the air con fan at the front? Did you make holes in the body for the sides of the intercooler?

Please msg me back :-)

you wouldn't have to cut holes in your car's body, that intercooler will hook up to your stock intercooler by the looks of things.

As for A/C fan, don't remove it leave it there it. If it touches just extend the brackets out longer to clear the A/C fan, but it shouldn't touch!

shouldn't touch...if u have a stock bar its almost guarenteed that some cutting will be needed...you will need to take of the front bar obviously but maybe I'm stating the obvious :thumbsup:

If ur gonna do it...get a decnet one...a few good priced ones in the GB section.

I don't plan on making it produce any more than 200kW. Things like a R33 turbo, turbo back exhaust etc. are planned for the future, is it likely to be a problem with that sort of power?

If its going to be too restrictive on a RB20 I'm probably not going to be able to sell it :s

I didn't touch anything relating to air conditioning system.

There is no need to cut any parts of the body - except on coolers where you have an outlet / inlet on either side and you want to take piping up on drivers side of engine bay, whereby you have to cut a hole to accommodate piping under battery area. Thankfully there is a preprinted circle where to cut this hole - apparently due to fact that if your car's body was destined to become a gtr on production line then this is where they would cut - but if your car's a gtst etc then the perforation, but no hole, exists.

I don't think the 180 degree turn will be an issue for you. In fact i think its Blitz that make skyline coolers in this maner. Not perfect but still very good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...