Jump to content
SAU Community

Recommended Posts

hey

my car is a series 1 r33 gts25t. Lately my turbo has been making a very faint whining noise every every now and then. This happens between -30cmHg and -20cmHg (read out on blitz dual sbc spec s). This is the only time i hear this noise (under very light throttle), never when making positive boost or under hard/harder acceleration.

Is my turbo on the way out? Or is a maybe a slight leak somewhere, or possibly something else?

I've searched some other posts and people say they get a squeal/whine noise when making boost at say 3500rpm, yet i get a faint whine at about 1800rpm, so i'm not too sure...

Link to comment
https://www.sau.com.au/forums/topic/123089-is-my-stock-turbo-dying/
Share on other sites

no, it doesn't blow any smoke (looked for that, and have also looked for any oil coming out of the turbo or piping and there is none).

the car has done about 104000km (assuming if it has been wound back, then more than this figure). It is a 93 model.

boost is stock and a setting at 10-11psi. But before the ebc (about 1 and 1/2 yrs ago) who knows what it could have spiked to during the period after the exhaust was fitted, as all i had to go by was the stock boost gauge.

mine does the same on slight acceleration - changed oil regularly and all seems fine tho - still makes slight whine (like a dog whistle almost) which I've heard on lots of others - bear in mind this turbo is spooling up to the phenomenal speeds it spins at just before the actuator opens so on slight accel your gonna hear something spin up - I haven't heard a totally silent one yet myself but I'm no expert either so every skyline I've driven or drove in might have been knackered lol!

the slight noise you could be hearing could be air passing through the bov. there is a point where you can hold the throttle where the bov will be open slightly. and since there is air permanently leaking around the bov through a recirculation hole, it can cause a whistle.

hey mad082 - you mention a bov (I'm assuming thats a blow off valve heh!) - do all r33gtst's have them or are they aftermarket addition?

I only ask as mine too makes this subtle whistle and it is at a certain point on the throttle as you said but I dont have an aftermarket dump valve on my car :D

theres other signs that your turbo is going anyhow - small puddles of oil in that metal piping that feeds up from your intercooler. There can be slight smears in the pipe that you can wipe of with your finger (charge pipe is it?) so dont fret if you pull it off and see that but if you pull if off and see it dripping then I'd be a bit more worried :D

smoke out the back on hard boost - basically oil escaping I think.

only know this as I had to disconnect mine getting to the spark plugs and we checked this area recently

all 33's came stock with a blow off valve... although the correct name is compressor bypass valve. it is situated just before the throttle body, on the cabin side of the piping. the are hooked back up to the intake between the air filter and the turbo, so that when you lift off the throttle the air goes back through the turbo to keep it spinning (like blowing on a kids windmill that you get from fair).

also i had oil dripping out of my intercooler piping at the throttle body, and a small amount through the piping before i did my frount mount. I thought it might've been the turbo on the way out, but after a few weeks with the front mount i pulled one of the new pipes off and there was no trace of oil at all. it turns out that the stock front seal on the turbo will always leak a tiny amount of oil. the front seal is like a piston ring. it isn't a full circle. it has a slight gap in it.

so my problem was just old oil, and a bit of blow by.

Edited by mad082

thanks guys. I will get the car on a hoist and a have a good look to check for tiny leaks in intercooler piping, as well as make sure the bolts on the tubo aren't loose.

Didn't think of the that tiny air recircualtion hole in stock bov, could be that.

Cheers...

Don't discount the bearings.

Mine had that whine on boost, it was on and off, and didn't really effect the performance.

I did a track day at Winton, all was good, but on the video, I coul hear it whining. high pitched noise.

A week later the bearings shat themselves.

So I got a high flow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
    • There is a guy who said he can weld me piping without having to cut chassis, maybe I do that ? Or do I just go reverse flow but isn’t reverse flow very limited once again? 
×
×
  • Create New...