Jump to content
SAU Community

Log Books/race Registration

phunky_monkey
 Share

Recommended Posts

phunky_monkey Grand Master

phunky_monkey

Posted
Posted

Hey all,

Just curious as to what is needed to obtain a log book from CAMS. I ask this because I would like to have my car log booked for two reasons:

1. To clock up enough hours and have my log book stamped so that I can apply for a C3 licence at some stage in order to import a race only car

and

2. To get race rego on the car.

Now, this second point I'm not 100% clear on, but have been told that once a car has clocked up a certain number of 'track hours' that the car can be transferred to a 'race' registration enabling it to be driven to and from the track/workshop, and for testing purposes without having to apply to CAMS for a permit each time.

Have I got this right, or am I way off...

Thanks

Dane

Link to comment
https://www.sau.com.au/forums/topic/123150-log-booksrace-registration/
Share on other sites
Duncan Grand Master

Duncan

Posted
Posted

re #2, you cannot get rego on a car imported as a "race" car. No matter how many races it has done.

You can get rego on a car imported as a "rally" car which is identical process through DOTARS except that you need a NR CAMS license instead of NC. Once you have NR you can get NC by doing an online lecture and paying the upgrade fee about $150. All the details for getting NC and NR are on the cams website, but basically once you have PC (formerly C3) you need to do 6 races in a 12 month period and be observered at those events.

In NSW once you have either a complied or a rally import car, you can apply for rally rego. You need a L2S or higher license only for rego, a log booked car with either full compliance or rally import approval, a safety inspection by a CAMS approved rally scruitineer and a heap of patience when you get to the RTA :)

In NSW if you have rally rego you can:

Drive and in to CAMS events

Drive to and from Practice

Drive to and from Workshops.

As long as you obtain a permit every day you want to use the car.

My GTR race car has rally rego and it is brilliant, saves trailering the car everywhere, didn't have to pay for SEVS compliance and I can use it for everything I ever need to :spank:

88silhouette Grand Master

88silhouette

Posted
Posted

i am going down this path also

called cams h.q. and then got put through to cams nsw

first step before anything re log book - roll cage!!!

cams bloke basically said dont call back until you have cage installed in your car

yeehaww

Duncan Grand Master

Duncan

Posted
Posted

Hey Mark I was checking out roll cage rules with CAMS the other day too.

ANyone can make an approved cage as long as they follow:

One of the homologated designs from the CAMS book (I am using 253-17) basic 6 point cage with diagonal between top of middle hoop and bottom of side hoop.

CDS, CDW or CEW grade mild steel

Main hoop 44.45 diameter (2.5mm wall) or 50mm (2.0mm wall)

All other components 38mm diameter (2.5mm wall) or 40mm (2.0mm wall)

cold bent tubing

"highest possible quality welding with full penetration".

Once the cage is done CAMS send out the cage declaration form for the builder to sign, then it gets a ROPS registration number.

88silhouette Grand Master

88silhouette

Posted
Posted
Hey Mark I was checking out roll cage rules with CAMS the other day too.

ANyone can make an approved cage as long as they follow:

One of the homologated designs from the CAMS book (I am using 253-17) basic 6 point cage with diagonal between top of middle hoop and bottom of side hoop.

CDS, CDW or CEW grade mild steel

Main hoop 44.45 diameter (2.5mm wall) or 50mm (2.0mm wall)

All other components 38mm diameter (2.5mm wall) or 40mm (2.0mm wall)

cold bent tubing

"highest possible quality welding with full penetration".

Once the cage is done CAMS send out the cage declaration form for the builder to sign, then it gets a ROPS registration number.

duncan any chance you can get me a copy/scan of that part of the book? or is is in that pdf on the cams website?

phunky_monkey Grand Master

phunky_monkey

Posted
  • Author
Posted
re #2, you cannot get rego on a car imported as a "race" car. No matter how many races it has done.

You can get rego on a car imported as a "rally" car which is identical process through DOTARS except that you need a NR CAMS license instead of NC. Once you have NR you can get NC by doing an online lecture and paying the upgrade fee about $150. All the details for getting NC and NR are on the cams website, but basically once you have PC (formerly C3) you need to do 6 races in a 12 month period and be observered at those events.

In NSW once you have either a complied or a rally import car, you can apply for rally rego. You need a L2S or higher license only for rego, a log booked car with either full compliance or rally import approval, a safety inspection by a CAMS approved rally scruitineer and a heap of patience when you get to the RTA :dry:

In NSW if you have rally rego you can:

Drive and in to CAMS events

Drive to and from Practice

Drive to and from Workshops.

As long as you obtain a permit every day you want to use the car.

My GTR race car has rally rego and it is brilliant, saves trailering the car everywhere, didn't have to pay for SEVS compliance and I can use it for everything I ever need to :D

Thanks for that Duncan :banana:

My car has full road rego at the moment, so transferring to rally reg shouldn't be an issue.

What is involved in obtaining a permit each time? Is it a pain, or is it an easy ph. call etc? Is there a limit to how many permits you obtain? I'd be looking at probably on average 6 days a month.

Duncan Grand Master

Duncan

Posted
Posted

Mark...yes and no >_< got a fax number?

phunkey, in NSW it is a call to an automated service. I'm not aware of any limit at one stage I was getting 5-6 a week and never got questioned!

You need to make suer all the rules in Vic are the same they are probably similar. Call the CAMS Vic office and ask about rally rego.

r171 Newbie

r171

Posted
Posted (edited)

Pretty sure that for Victorian RP cars you don't need to call up each time, as the Rally Permit is itself a 12-month UVP. You will need a R3 license or above, and not L2S+ like NSW..

With RP plates you can use the car:

- During CAMS-approved rallies, including SS and transport stages

- Travelling to and from a rally, and its scrutineering

- To and from Workshops

In addition to this, you can also use the car in testing for an approved rally, but you must apply to CAMS for a letter which states that testing is permitted.

But yep, the process for applying for a Vic rally permit this will be the same as NSW.. in that u will need a cage with ROPS registration number, as well as the car logbooked and scrutineered by a CAMS official before it can be registered.

Edited by r171
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      RH9 R32 GTR Build Thread

      By soviet_merlin · Posted

      Out of curiosity, how do you cover up the inspection hole? Surely it doesn't sit open like that, right? With grime and dirt coming in and oil going out?
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • Matt Z
      SAU NSW - Bathurst Run 2025

      By Matt Z · Posted

      🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...