Jump to content
SAU Community

Recommended Posts

Just bought and read the complete T04Z article in the latest HPI mag. Interested to see that the HKS T04Z comes in 3 different exhaust trim houseings, 0.61 - 0.81 -1.00.

In the test they use the 0.81 option, and find it to be a bit laggy on a RB26DETT. It generates 420RWKW odd, at 1.4Bar, but the midrange wasnt great. Martin Donnon also noted that at the engines 8200RPM limit the turbo was still increasing power and so was a bit big for an internally stock GTR.

Funny though, even with what they described as being a laggy option, the 0.81 T04Z was still more responsive than my HKS 2540's when i compared it with my dyno graph!!!

Just wondering if anyone knows of the results achieved with the smaller more responsive 0.61 option. I wouldnt be looking for 450RWKW, high 300s at about 18-20PSI with good midrange is what im chaseing.

Do Garret offer the different trim options?

Is the only thing you can change is the 0.61 - 0.81 - 1.00 exhaust rim?

Any thoughts experience would be appreciated..

Cheers

Link to comment
https://www.sau.com.au/forums/topic/123165-t04z-specs/
Share on other sites

there are probably better bolt on twins that should fit in the stock location and give you some good power and midrange. the 2540's are known lag monsters and create extra lag due to a mismatched combination which is what you are experiencing with your current setup. twin 2530's may change that

Link to comment
https://www.sau.com.au/forums/topic/123165-t04z-specs/#findComment-2274902
Share on other sites

Are you referring to the article... that as you know has been debated here

http://www.skylinesaustralia.com/forums/in...howtopic=121442

because if so, i wouldnt really take any write up about it as i think its totally wrong just be the results that have been supplied.

I dont think the .8X is laggy at all.

I think all the GTR's here in Vic using it are using the .8X housings.

I'll ask around just to be sure, and certainly all the owners are more than happy having spoken to them all.

In a .6x i think is is going to be choked quite substancially which would really limit power, and the top end.

It would have a meaty mid-range. IMO the .8x still has a great mid.

RE: 2540's... they are hotly regarded as somewhat of a mismatch on many scales and not really a good performer at all.

I'd say use 2530's... or hold out for the GT-ZZ release later this year.

Being you have all the gear now using 2540's. Should be a direct swap i think?

Link to comment
https://www.sau.com.au/forums/topic/123165-t04z-specs/#findComment-2274923
Share on other sites

GT-ZZ's???!!!! Are these the low awaited replacement for the 2530's?

Yeah i allready have all the HKS Manifolds and Dump pipes for the 2540's, so in theory a change to a another HKS low mount combo should be a straight bolt on affair, give or take an oil feed or two. Prolly cheaper and easier than starting out with a whole new high mount setup. I do like twins aswell.

I did think of either 2530's or the new GT-SS's, but i think the GT-SS's are a bit small for my power goal. Although laggy my 2540's still give me 330AWKW at 18PSI so i dont want any less power than this. The 2530's are starting to get a bit old IMO, but if theres a newer replacement for them comeing, i might have to wait and see how they go. The new HKS GT-Rs are the reaplcement for my 2540's but from the sounds of things they still dont live up to the hype and would prolly be as laggy as mine are now, with a bit more top end.

Cheers guys...

Edited by mazgtr
Link to comment
https://www.sau.com.au/forums/topic/123165-t04z-specs/#findComment-2275023
Share on other sites

GT-RS is not what you want.

the GT-ZZ, i dont think there is a release date as yet.

GT-SS/GT-RS are out... so one would think the GT-ZZ surely couldnt be much further away.

There has been basic discussion here, and some on GTR UK... but not a lot really firm information as yet. But they were marked as the replacements for the 2530.

If your only getting 330 from 2540's i say there is a problem.

2530 will easily make more than that and the 2540 are just laggier

Link to comment
https://www.sau.com.au/forums/topic/123165-t04z-specs/#findComment-2275096
Share on other sites

If your only getting 330 from 2540's i say there is a problem.

2530 will easily make more than that and the 2540 are just laggier

No from what ive seen thats a good power figure for this particular dyno. Ive seen a healthy stock R33 GTR struggle to make 140AWKW so it does read a little low. Generally a GTR with 2530's needs a few more PSI (3-4) to match mine on that dyno. But their much more responsive.

Ive got an old dyno sheet from the previous owner with 360AWKW, but i dont know at what PSi, prolly about 20-22 pounds.

Im happy with the added reliability i have "only" running 18PSI. I havnet yet found a situation where 330AWKW wasnt enough........ for now :D

Edited by mazgtr
Link to comment
https://www.sau.com.au/forums/topic/123165-t04z-specs/#findComment-2275607
Share on other sites

GENUINE GARRETT 66mm INDUCER COMP WHEEL BALL BEARING TURBO

.70 TURBINE HSG 700+HP

.84 TURBINE HSG 700+HP

.96TURBINE HSG 750+HP

1.00 TURBINE HSG 750+HP

1.15TURBINE HSG 750+HP

1.32 TURBINE HSG 750+HP

1.52 TURBINE HSG 800+HP

1.75TURBINE HSG 800+HP

T4 TURBINE INLET FLANGE

Link to comment
https://www.sau.com.au/forums/topic/123165-t04z-specs/#findComment-2275659
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...