Jump to content
SAU Community

Recommended Posts

Hey Kevin, welcome to SAU.

I'm guessing that you live in NZ, right? Non-turbo Stageas were not available here in Australia, although I believe there is at least one workshop here working on getting compliance certification for the PM35 with the atmo VQ35.

Nice one, now to find yourself a nice set of wheels to fill out those guards and compliment that kit!

  • 2 weeks later...
  • 2 months later...

Here is a pic of my RS4-S, owned it now for about two months.

Purchased it dead stock, only just starting to modify it. So far fitted Tein coilovers, rear camber arms, Work emotion 11r's in 18 x 9.5 +15 all round (5mm spacer's) with 235/40 Hankook's, HKS pod etc.

Spent a fair while looking for a optioned up black RS4S, found this mint one owner example.

Came with factory Nismo exhaust, Nismo suspension, option BBS wheels, twin sunroofs, option fog lights, full DAYZ kit etc.

post-47733-1256695282_thumb.jpg

Here is a pic of my RS4-S, owned it now for about two months.

Purchased it dead stock, only just starting to modify it. So far fitted Tein coilovers, rear camber arms, Work emotion 11r's in 18 x 9.5 +15 all round (5mm spacer's) with 235/40 Hankook's, HKS pod etc.

Spent a fair while looking for a optioned up black RS4S, found this mint one owner example.

Came with factory Nismo exhaust, Nismo suspension, option BBS wheels, twin sunroofs, option fog lights, full DAYZ kit etc.

post-47733-1256695282_thumb.jpg

Looks awesome....have not seen a C34 done over it back...nice car.

Why the spacers?

Rubbing issues or to fill the guards more??

A bit of both. I'd much prefer an offset of +10 all round.

I'm still not happy with the fitment and wheel colour, Ive found a set of SSR sp1's in good size and offset so I may snap them up.

I just can't get over how big the guards are on these, my old JZX100 would have struggled to have fit a 9.5 +20!!!

Welcome aboard, Brendan and Ana, adey88 and Dan!

adey88, is that a NSW number plate I can just make out on your car? If so, roughly whereabouts do you live?

yeah its a NSW plate - im from sutherland.... there seems to be a few stags down this way!

I just got home and got done for driving the stag - I am still on my green P's!!!! F*&'N rules....I think its 7 demerit points!!! thinking of selling it now.... I've only had it a few months too :thumbsup:

hmm, did that M35 come from SSV here in VIC, Ana?

You don't see too many with the Gialla front bar and side skirts (Nismo or "aero" rear bumper, perhaps?)

lol yep, was not happy when i got it home, the transport company damaged it.

and no idea lol

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...