Jump to content
SAU Community

Identifying Gt3540r 0.82

SirRacer

By SirRacer,
in Engines & Forced Induction

 Share

Recommended Posts

SirRacer Experienced

SirRacer

Posted
Posted

I really wanted a t66 but have been offered a gt3540r 0.82 at a great price so am going to go with it.

What i want to know is how im going to identify the turbo as from what i know the compressor housing and exh is similar one most of the other similar sized garrett turbos.

Any information would be great. Have done a big search but come up with nothing.

Link to comment
https://www.sau.com.au/forums/topic/123906-identifying-gt3540r-082/
Share on other sites
garage-tuner Rookie

garage-tuner

Posted
Posted

SirRacer,

The standard GT3540 (aka GT35R or GT3540R or GT3582) uses a 61.36mm, 56 trim compressor wheel in a 0.70A/R compressor housing and a 62.32mm, 84 trim exhaust wheel, in either a 0.63, 0.82 or 1.06 A/R exhaust housing.

To identify the turbo, check the code on the Garrett ID tag on the core. If it says “706451-15” it is a GT35.

The exhaust housing A/R is cast into the side of the inlet to the exhaust housing.

Cheers.

discopotato03 Grand Master

discopotato03

Posted
Posted

My lists for the GT35R or GT3582R as Garrett now call them show the cartridge (CHRA) number as 706451-5 . The complete unit part numbers are 714568 -1 or -2 or -3 depending on which AR ratio turbine housing it has ie 1.06 , .82 or .63 in that order .

So if you order a GT3582R in .82AR ratio turbine housing its part number should be 714568-2 . Confirm that it has a 68mm 84 trim turbine and 82mm 56 trim compressor of the 6/12 blade GT family . The compressor cover should be a .70AR ratio TO4S type .

Cheers A .

Guilt-Toy Grand Master

Guilt-Toy

Posted
Posted
cheers, its this part number 714568-2 and the comp cover is the .70

i just wasnt sure where to look as they arent labeled gt3540r on the garrett site anymore.

cheers

awesome turbo ! i have one on my rb30det - makes full boost before 3500 16psi

SirRacer Experienced

SirRacer

Posted
  • Author
Posted

hey there, my setup will be very very similar to yours but im going to run more boost and some giggle gas for good measure

ill let you know how it goes. wont be put together for a few more months but have most of the parts now.

wind up the boost, come on you know you want to

Guilt-Toy Grand Master

Guilt-Toy

Posted
Posted

Hey

I am running a stock bottom end (cast pistons) so 350rwhp is kinda enough for me for now.. with the 3 litre its all you need for the street. I guess i could go up to 22psi and make shitloads more but thats when i can afford it and get sick of the power.

hey there, my setup will be very very similar to yours but im going to run more boost and some giggle gas for good measure

ill let you know how it goes. wont be put together for a few more months but have most of the parts now.

wind up the boost, come on you know you want to

Cubes Grand Master

Cubes

Posted
Posted
Hey

I am running a stock bottom end (cast pistons) so 350rwhp is kinda enough for me for now.. with the 3 litre its all you need for the street. I guess i could go up to 22psi and make shitloads more but thats when i can afford it and get sick of the power.

I note in your sig... 350rwhp on 16psi.. any more power and its a waste.

As your not after more would you consider dropping to the GT30r? Or do you think it would pose greater traction problems?

Guilt-Toy Grand Master

Guilt-Toy

Posted
Posted

Probably not. It drives pretty good atm. Pretty happy with the way its going. Dont really have a big desire to go for more power at the moment. But that will change when im ready to go to the track.

I note in your sig... 350rwhp on 16psi.. any more power and its a waste.

As your not after more would you consider dropping to the GT30r? Or do you think it would pose greater traction problems?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      NC MX5

      By MBS206 · Posted

      There's a good German place in Brisbane if youre up for the drive 😛
    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • joshuaho96
      R33 GTR running -9 with no tune

      By joshuaho96 · Posted

      Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
×
×
  • Create New...