Jump to content
SAU Community

Recommended Posts

Hi Guys!

After putting up with squeaking suspension since I got the car, I decided to find out what the problem is so I thought I would pay $14 and get pedders to tell me :(

I never intended to have them repair it as they charge like a wounded bull and once I saw the $1700 price tag it made laugh! :happy:

I have had a look around the place but have not really found anywhere and hoped someone would be able to point me in the right direction or give some advice as to my options.

I am looking at spending no more than $1000 and would like to lower it at the same time. (R32 GTS-t) I will be buying eveything I need and then either fitting it myself or if I am too lazy, I will get someone (for a few cartons) to fit it for me...

This is the list of what I need.

-Shocks - front, but I will do all (peferably something with above standard performance - but it wont be a race car)

-Lowered springs

-Sway bar bushes

-Upper bushes

-Lower bushes

-Radius bushes

-Bump stops

I have the option of getting some super low king springs on Apexi damper adjustable shocks in good condition for $500 so that may be a good option for that but where do I go for the bushes ect?

Thanks for any help or advice!!

Edited by CATKICKER

you can buy bushes from whiteline, sydney kid has some threads in the "group buy" section

your list has alot of stuff on it, $1,700 fitted isnt a bad price for all you've mentioned.

I would avoid second hand shocks.

http://www.skylinesaustralia.com/forums/in...showtopic=85467

The $1700 fitted is only for stock front shocks and not including springs...

bit steep in my opinion!

I would expect if I were to shop around I could get the bushes for about $300-$400 and shocks for about $300 a pair new...

Tell me if I am dreaming!

$1500 for stock front shocks? Tell 'em they're dreaming!

A full set of new Koni adjustable dampers for my car cost me around that. And my car had only been released to market for around a year, so performance parts were hard to find and not particularly cheap.

But if its with all the bits listed, then as Merlin says its not too bad.

Hi Guys!

After putting up with squeaking suspension since I got the car, I decided to find out what the problem is so I thought I would pay $14 and get pedders to tell me :)

I never intended to have them repair it as they charge like a wounded bull and once I saw the $1700 price tag it made laugh! :)

I know it's not exactly helpfull but "pedders" ........... "charge like a wounded bull" :(

You'll be well over 1k by the time you source and install everything listed. Consider that replacement of all the front end bushes including an adjustable upper arm will set you back about 400 retail, maybe a bit more with the radius rod bushes replaced with adjustables, and the rears are about the same. Installation of the bushes isn't that hard but removal of everything from the car and pressing the old ones out is time consuming, so expensive. Chuck in your springs and new decent shocks and you will be over 1700 before you know it.

Have a look at the Group Buy thread;

http://www.skylinesaustralia.com/forums/in...showtopic=85591

then if you have any questions please just ask.

:( cheers :)

PS stay away from Kings Super Lows, as many guys have found out, they are not a good choice.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Im not entirely sure exactly what or where its leaking from, he started to pull the boots to swap to my new tie rods + ends and it just vomited fluid, so he closed em up up, swapped the rod ends to the old rods and let me know so I can figure a solution out, im guessing its all origional as as I passed 103k miles earlier this year im sure its just in need of a full overhual/rebuild anyways.    If i could just yank it off and be good it wouldn't be an issue to ship it out and wait for the turnaround but the guy I work with doesnt really have space to keep my car for a week or two at a time, would rather drop it off and have a replacement ready to drop in
    • What do you mean by "seals"? Internal hydraulic seals (ie, is it leaking PS fluid?) or the rack boots that close the rack onto the tie-rods? Because the former is a rebuild, and the latter is trivial that you or any nearby mechanic could do. Dunno about the cowl. Just buy what you think is required and get anything else you find/break afterwards. Wing? Dunno. Don't like R33s enough to pay attention to them. Mirror glass is just glass (on the surface that you want to polish). Go for it.
    • Hello! Long time lurker, been using the forums to address concerns and questions from afar for a while but I've struggled to find some answers so I guess its about time I made an account and formally asked some more knowledgeable people, since finding local skyline owners is hard (and shops that are knowledgeable or trustworthy to work on 'rare' cars are non existent out where im at, as skylines are quite uncommon to find in the wild around here). So the main 3 questions I have, 1: Steering rack has blown seals, well.. they kind of hold but they are not sealed properly anymore and as my R33 is my DD, i cant exactly rip the rack out and send it off or attempt to fix myself. As most refurb ones are around $1,100 or more shipped, and I have other things I need to work on around the car, I was seeking clarification on whether an S15 rack will more or less bolt right in, and whether a common mechanic could do any other required work to get it to fit. I ask, as I've found a supplier than can sell a manufactured as oem one for around 400, if not I'll likely order a used one from Jacks JDM, and take a risk on the seals there. The second question i have is that im replacing the front wiper cowl and have planned to buy 4 new clips and a new center clip but wasnt sure if there were any other clips that would also need to get replaced while I was at it. Given im sure any that are there now will simply break when I remove the old cowl... Last thing would be a fairly straight forward question, i think. If I manage (strong if, finding one has proven to be a pain) to find a R33 GTR spoiler/wing will it require much modification to bolt to a S2 R33 GTST? I've read the bolt patterns dont match but otherwise would bolt in, only options I have found with much luck is China stuff on ebay and carbonetics, which has a nice $650 shipping fee... so if anyone has any pointers where a US chap could locate one that would be great Random side question as well, the mirrors as I understand are mirror glass, and as im planning to polish my windows from water spots and surface scratches, i was hopeful cerium oxide would be fine for them too, as my research points to, but clarification is always nice. Any pointers would be appreciated, and while I have scoured the internet for answers if I missed a prior post somewhere that may answer these directly please point me towards it, as i must have simply missed it. I have seen a post here or there that has mentioned it, but I usually get 50-50 answers, or half answers... I dont have a lot of fab experience or mechanic experience, outside of hydraulic and pneumatic stuff I did in the military and with how hard it is to source stuff in the US, id rather not wing it and hemmoraghe money lol. Thanks guys! Sorry for the monumental first post haha
    • Yep, there's a very minor drift left that happens a few seconds after letting go of the steering wheel, but not enough to bother me. Enjoying the car still!
    • Got you mate. Check your email!
×
×
  • Create New...