Jump to content
SAU Community

Recommended Posts

evening all

Its been quite a while since ive played with my 280zx that had an rb20det. But ive still got some gear sitting around that im sick of looking at. so saying that i dont mind getting rid of it cheap.

No pics as yet. If theres serious interest ill russtle some up.

heres some of the gear i need gone.

Reconditioned r32 gtst 5sp.........................

Cost me 1400 including labour to put in my car. so recon alone cost about 1000. have receipts somewhere. Car was taken off the road not long after so less that 2000ks on box. I feel $350 is a pretty fair asking price..Comes with shifter and servo.

New Xtreme ceramic 5 puck button clutch/thrust bearing. and machined 32gtst flywheel....................

0 kms on both.- want $250.

Reconditioned rb20det head..........................

Comes complete with everything, ready to bolt on. once again 0kms on this head. Recon cost me $300. Have receipt. sell for $270. Will also throw in a VRS kit missing a few gaskets but mostly all there and a set of rb20det polished rocker and spark plug covers.

I live on the north coast of NSW. Your welcome to pick up or i will happily send it. You pay postage and do the running around.

Please dont waste my time with stupid offers.

can PM me or email me at [email protected]

cheers

Tim :laugh:

Reconditioned rb20det head..........................

Comes complete with everything, ready to bolt on. once again 0kms on this head. Recon cost me $300. Have receipt. sell for $270. Will also throw in a VRS kit missing a few gaskets but mostly all there and a set of rb20det polished rocker and spark plug covers.

Hey Timd,

Just asking how much the clutch combo is rated at? If it can handle 300kW consder it sold!

Cheers,

Chris

http://www.horsepowerinabox.com/HPIAB2/prod58.htm

thats the one. I have a feeling it wont handle 300rwkw for long. With that sort of power id be looking into a twin plate. I bought it with the intention to hold 200rwkw. i remember that figure was within this clutches limit but i cant remember by how much.

tim

k43 I have what is listed above champ, cant help you with anything else to do with a conversion.

azzurra couldnt tell you exactly what is done.

I drove my car into the shop and asked them to recondition my 5sp. When it was taken from the car it was running perfectly. As youd expect after thrwoing a grand at it.

There was nothing wrong with it before the reco. I had the money at the time and wanted a fresh reliable box to go behind the motor i was building.

Tim

To everyone who has asked for me to chase up shipping.

I am more than happy to send the thing but you must organise freight. At the moment i am too busy. Its a cheap box, if you really want it spend some time on the phone!

ok it seems everyone wants a 5sp but no-one is willing to chase up freight.

Soooo, I will organise freight. If your genuinely interested let me know your address and i can organise delivery to your door.

YOU PAY FREIGHT

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...