Jump to content
SAU Community

Next Drift Meet At Mallala

savage GTR

By savage GTR,
in South Australia

 Share

Recommended Posts

Deluxe Grand Master

Deluxe

Posted
Posted
Just cuirous if the timetable is right because it doesnt show last months meet

if it is right GREAT , who's coming. :PBJ:

I believe G1 Rnd2 is on the Sunday 16th of July(daytime round) and yes i will be there as per every drift comp/practise! and the weekend before i will be there also with Superkarting, and the week after the drift comp for the Improved Production meeting with the Supertrucks, DAMN 3 weeks in a row at Mallala........Ahhhhhhh I love it!!

savage GTR Rising Star

savage GTR

Posted
  • Author
Posted (edited)

Is this another $25 dollar day or will it be cheaper? Does anyone have the full timetable and are we likely to see the cappa ute,manaro and fpv typhoon there?

If they are this should still be a top day and we should see some great action anyway.

By the way I have about an hour of drifting action on cd from a couple of the last event's if anyone wants to watch. :whistling:

Edited by savage GTR
Madaz Grand Master

Madaz

Posted
Posted
I'll be there like usual.

I doubt the said above cars will be there as its only SA drift comp. Not a nation wide one.

But who knows these days.

CAPA drift ute is a SA ride

dunno if ill be there chances are good i might be

Deluxe Grand Master

Deluxe

Posted
Posted (edited)

CAPA is one of Bolgers cars and he's in QLD, doubt he will bve coming down, although he does need some practice at Mallala. :P:D:wave::D

There will still be some of the best drifters in the state, as SA has the best represent in Australia. Corporal, Marky, Kelly Mc, Crab, Phillips, May, Lockett, Frencham, Lindo, Denzo, Aussie and not too mention the others i forgot, well worth headin out!

Edited by Deluxe
beno33 Apprentice

beno33

Posted
Posted

yeah ill be heading out there to support my mate FAST EDDIE! unfortunately he'll probably be even more underpowered than last DA comp, running stock boost on the little supercharged sprinter, but he'll be givin it a go!

hope to see some nice 'lines out there fellas

datto_boy Enthusiast

datto_boy

Posted
Posted
There will still be some of the best drifters in the state, as SA has the best represent in Australia. Corporal, Marky, Kelly Mc, Crab, Phillips, May, Lockett, Frencham, Lindo, Denzo, Aussie and not too mention the others i forgot, well worth headin out!

I don't think Crabs cars is in SA...

shy_s6 Veteran

shy_s6

Posted
Posted

hehe @ savage GTR he ask's bout the drift comp then wants to pose on the grass :s i think some of the big boys may actually be in syd as they have a practise day there and 2 weeks later is the DA round

-skyline- breno33 its all about being out there thats the main thing! go out n have fun :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      7 Speed Auto transmission fluid change (Skyline, Q50, Q60, Fuga, Q70, A62 Titan and probably heaps of others including Navara...)

      By Duncan · Posted

      OK, Step 3, if you need to remove the valve body, either to replace it, the TCM, or to do a more complete drain.  First, you need to disconnect the TCM input wires, they are about half way up the transmission on the drivers side. One plug and the wires are out of the way, but there is also a spring clip that stops the socket from sliding back into the transmission. On my car the spring clip was easy to get, but the socket was really stuck in the o-ring of the transmission housing and took some.....persuasion. You can see both the plug to remove (first) and the spring clip (second) in this pic Incidentally, right next to the plug, you can see where the casting has allowance for a dispstick/filler which Nissan decided not to provide. there is a cap held on with a 6mm head bolt that you can remove to overfill it (AMS recommend a 1.5l overfill). Final step before the big mess, remove the speed sensor that is clipped to the valve body at the rear of the box.  Then removal of the Valve Body. For this the USDM Q50 workshop manual has a critical diagram: There are a billion bolts visible. Almost all of them do not need to be removed, just the 14 shown on the diagram. Even so, I both removed one extra, and didn't check which length bolt came from which location (more on that later....). Again it is worth undoing the 4 corners first, but leaving them a couple of turns in to hold the unit up....gravity is not your friend here and trans oil will be going everywhere. Once the corners are loose but still in remove all the other 10 bolts, then hold the valve body up with 1 hand while removing the final 4. Then, everything just comes free easily, or like in my case you start swearing because that plug is stuck in the casing. Done, the valve body and TCM are out
    • Duncan
      7 Speed Auto transmission fluid change (Skyline, Q50, Q60, Fuga, Q70, A62 Titan and probably heaps of others including Navara...)

      By Duncan · Posted

      OK, so if you are either going for the bigger fluid change or are changing the valve body which includes the Transmission Control Module (TCM), first you should have both a new gasket 31397-1XJ0A and a torque wrench that can work down to 8Nm (very low, probably a 1/4 drive one). You can probably get by without either, but I really didn't want to pull it all apart together due to a leak. First, you now need that big oil pan. The transmission pan is 450 long x 350 wide, and it will probably leak on all sides, so get ready for a mess. There are 24x 6mm headed bolts holding the pan on. I undid the 2 rear corners, then screwed those bolts back in a couple of turns to let the pan go low at that end, then removed all the middle bolts on each side. Then, undo the front corner bolts slowly while holding the pan up, and 80% of the fluid will head out the rear. From there, remove the remaining bolts and the pan is off. You can see it is still dripping oil absolutely everywhere...it dripped all night.... I got another couple of litres when I removed the pan, and then another few when I removed the valve body - all up another 4l on top of the 3 already dropped in step 1.
    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • Kinkstaah
      Wheel Sizes & Offsets For Skylines

      By Kinkstaah · Posted

      If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • GTSBoy
      Wheel Sizes & Offsets For Skylines

      By GTSBoy · Posted

      If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
×
×
  • Create New...