Jump to content
SAU Community

Recommended Posts

hey fellas,

i'm buying a modified r32 gtst soon and was wondering the requirements needed to pass for a RWC?

Engine Mods were: Custom Garrett 500HP Ball Bearing Turbo, Braided Oil and Water lines, Bosch 044 Fuel Pump, Bosch 555cc injectors, Custom Fuel Rail, Malpassi Rising Rate fuel regulator, HKS Air Pod, HKS Heavy duty actuator Valve, 3inch turbo back exhaust with Dual chamber dump pipe, Microtech LT10s computer

Apexi AVCR, stainless steel intake pipe, Hybrid Front mount intercooler, Catch Can, Exedy Heavy duty organic clutch, Lightened flywheel

Other mods: Phillips XENON headlight kit, Sony XPLOD Head Unit, Blitz Turbo Timer, Blitz Boost Gauge, Razo Gear Knob, Nismo Short Shift Kit, Momo Steering Wheel, new tyres

What modifications do they usually check for a RWC, how long does it take for the checkup and also the price to get a RWC done?

thanks

Link to comment
https://www.sau.com.au/forums/topic/125264-requirements-for-a-rwc/
Share on other sites

From what I can see, illegal modifications are:

Pod filter + FMIC combo, aftermarket ECU, boost controller, catch can if it vents to atmosphere.

I'll assume the Philips headlight kit complies to ADR standards so that will pass.

The boost guage might be a problem if it's mounted on the A-pillar, so will the steering wheel if any part of it is highly reflective (ie. chrome) and distracts your vision (ie. glare). Also make sure because you don't have the stock gear stick knob, that you have a sticker to indicate your gear patterns.

Apart from checking the basics such as lights, wipers, etc, they will usually check your suspension and steering bushes under the car as well, so make sure steering boots or whatever aren't cracked and so forth. They will also check for exhaust leaks and if your engine and gearbox mounts are still in good condition.

Someone else might have more information for you.

You'd be better off talking to the place thats going to do your WRC

there is such a large inconsistency with the application of the regulations that one place will pass things another wont, but pick on stuff that really shouldnt be

hey fellas,

i'm buying a modified r32 gtst soon and was wondering the requirements needed to pass for a RWC?

Strictly speaking whoever you are buying it from is supposed to supply the RWC. This can be a negotiation point, but at least make the purchase conditional on an initial RWC inspection.

i had to do organise the rwc on my r33 when i got it. it failed the first time for:

wiper blades

split muffler

rear seat not secure

compliance plate covered

wing not secure

and i have on it

atmo bov

dual stage boost controller

2 guages on a pillar

pod and fmic combo

depend where you take it really...

thanks for that guys, appreciate it.

Hey there, >_<

A roadworthy is a test of the cars ability to be driven safely...

So...brakes,tyres,wipers,lights,seat belts ,windsreen,horn,shocks,excessive oils leaks,holes in the muffler or smoke out of the rear end are basically what they look at....its not an epa test

I am a mech, and work at a roady specialist.

Most things are checked to be secured and present; ie emissions gear to appear to be present; cat, stovepipe, charcoal canister etc.

All loose items; sub, stereo etc, are to be secure, as it the battery.

They largely look at leaks, bushes, ball joints, unis, tyres, brake pads, disc rotor thickness etc.

thanks for the replies everyone. I was also wondering an estimate of how much a RWC will set me back, considering the mods?

Also, does anyone know of a mechanic that can take a look at the car on wednesday, around the Lilydale area?

cheers, miguel

Edited by Race Bred
thanks for the replies everyone. I was also wondering an estimate of how much a RWC will set me back, considering the mods?

Also, does anyone know of a mechanic that can take a look at the car on wednesday, around the Lilydale area?

cheers, miguel

The costs all depend on all the above items mentioned and there costs...ie tyres brakes windscreen etc might all need to be replaced

After the roadworthy you get a paper listing your problems and off you go to fix them

The cost of the roadworthy if i recall is about $70 but the cost to you depend on all the faults.

I believe you are given two weeks to fix them and return back to the place to re-inspect and stamp

the paper work.

Once the dates expire you need to pay the $70 again.

You might be pleasently surprised or dumbfounded on the faults and the money you need to spend to get it roadworthy.

Good Luck

Edited by 700HP-GTR33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...