Jump to content
SAU Community

Recommended Posts

thinking about putting a set of adjustable cam gears on my r34 rb25det neo, just wondering if anyone has some tips they can share or run into any problems installing them? what to do about the variable cam timing on itake and exhaust? if anyone has done this with a neo engine pics would be great if you could post them up.

thanks.

Link to comment
https://www.sau.com.au/forums/topic/125697-adjustable-cam-gear-on-rb25det-neo/
Share on other sites

R33 & R34's have variable intake timing only and yes you can get decent gains by adding an adjustable cam gear on the exhaust side.

Best time to do it is when you need to change cambelt and associated tensioners and do it all at once.

A decent mod for $200.

No point doing it for looks though as it will be behind the cover.

R33 & R34's have variable intake timing only and yes you can get decent gains by adding an adjustable cam gear on the exhaust side.

Best time to do it is when you need to change cambelt and associated tensioners and do it all at once.

A decent mod for $200.

No point doing it for looks though as it will be behind the cover.

i was actually looking at putting the adjustable cam gears and gates timing belt on and modifing the greddy rb26 clear timing case to suit the rb25. but if the intake cam gear still has to have that ugly alloy cylinder on the end of it, it may be pointless doing the mods as i was only really interested in doing it for the looks.

Yes it will look good mate. I have heard mixed results in regards to performance by ajusting the exhaust cam gear but could not get a straight answer on this. Has anyone here completed this mod with noticable results?

but what about the ugly cylinder on the end of the intake side cam gear????

Yes it will look good mate. I have heard mixed results in regards to performance by ajusting the exhaust cam gear but could not get a straight answer on this. Has anyone here completed this mod with noticable results?

yes, but then i replied before. when u do the timing belt it is a no brainer on an R33. you should pick up around 5-15kw most of the way thru the rev range. roughly 4 degrees give or take depending on what you get on the dyno.

R34 neo engines seems to be no gain.

Edited by wolverine

Walkoau, Pm'd SK from Stagea page with fitting adj. cam gear to NEO. VVT on inlet, can fit a.c.g. to ex. I have an R33 gear to put on my Stagea. SK has run his at -4deg so far. Great post in Stagea page showing how to fit (in DIY).

  • Like 1
Walkoau, Pm'd SK from Stagea page with fitting adj. cam gear to NEO. VVT on inlet, can fit a.c.g. to ex. I have an R33 gear to put on my Stagea. SK has run his at -4deg so far. Great post in Stagea page showing how to fit (in DIY).

thanks for the info, so no need to fit a a.c.g to inlet side cam because of vvt, only worth doing on the exhaust.

yes, but then i replied before. when u do the timing belt it is a no brainer on an R33. you should pick up around 5-15kw most of the way thru the rev range. roughly 4 degrees give or take depending on what you get on the dyno.

R34 neo engines seems to be no gain.

I hope your correct I am up for my 100k service shortly. I will have one fitted and dyno tuned with my SAFC2 and post a back to back comparison. The charts I saw were putting out low power to start with then I saw an extra 15kw or so like you said. Im making 195rwkw already so hopefully this mod will push me over 200rwkw.

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...