Jump to content
SAU Community

Recommended Posts

Hi guys

Heres the #2 GB for the CATCO 3" high flow cats!

The 3 types of 3" cats available as bolt on for the R32 GTST/GTR, R33 GTST/GTR & R34 GTT Skylines are as follows (These same cats are also available bolt on for the S14/S15 200SX)

3" small body BOLT ON Catco cat (ceramic inside) - GB price only $160 including delivery

3" large body BOLT ON Catco cat (ceramic inside) - GB price only $230 including delivery

3" metal Catco cat BOLT ON (5" round body, 200csi metal inside - 706.2 CFM!) - GB price only $360 including delivery (They are $10 more than previous GB due to fluctuating costs on this particular cat)

Competitor cats either have a 200csi substrate with 4" body (Metal Cat) or 300csi substrate with 4" body (Magic Cat), making them inferior in flow to the CATCO metal cat.

ALL 3 of these CATCO CATS comply with EPA and CARB requirements and are made in the USA. There has been 100's sold through the SAU forums and not one problem has occured, EVER! so you know you are buying quality!

Take advantage of these rare GB prices! A min of 10 people is needed and it can be any one of the cats above. Note the metal CATCO cat is $80 cheaper and the price includes delivery!

Please list your interest in the thread below by stating which cat you are after and which car its for. All payments must be in by Tuesday 18/07/06. BATMBL will provide bank account details through PM, so please also send your address details this way to him.

Hey Michael,

May as well get a 3"metal sub cat to go with my split dump thats on its way from the other GB.

So 1x 3"metal cat for R32 GTSt please!

Thanks,

Rhett

put me in for this one please, can you give me a dimension length wise please., flange to flange. thanks

3" metal Catco cat BOLT ON (5" round body, 200csi metal inside - 706.2 CFM!) - GB price only $360 including delivery (They are $10 more than previous GB due to fluctuating costs on this particular cat)

godzl1975,

The length from flange to flange is about 315-318mm. (Cant quite get the exact measurement because of the measuring tape curving over the cat). The same bolt on cat is used for R32 and R33 GTST or GTR.

cheers

godzl1975,

The length from flange to flange is about 315-318mm. (Cant quite get the exact measurement because of the measuring tape curving over the cat). The same bolt on cat is used for R32 and R33 GTST or GTR.

cheers

ok kool....let you know if it will bolt st8 on thanks aaron

hi guys

6 cats were sent out today. the list has been updated, so check if yours was sent. Everyone else will get their cat sent out tomorrow (Thu).

All of you should receive your cat either this Fri or next Mon-Wed depending on how long it takes to receive registered post from Sydney.

A BIG thank you to all who participated in this GB and due to the success we may have another one soon.

cheers guys

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...