Jump to content
SAU Community

Recommended Posts

Hey.

Just a quick question about installing the catch can on my RB20det.

I have a aftermarket turbo and top mount manifold and the usual line which people plumb into is no longer.

Heres a quick picture of what i propose to do.

Is it correct? Is it the right breather to go off. Reason i went this one is it has had nothing on it at all since the new intake and everything had been on.

catchcaninstall.jpg

What do yous think?

Link to comment
https://www.sau.com.au/forums/topic/125887-rb20-catch-can/
Share on other sites

Your intake plenum looks like a low cost option for those of us that want front mounts without the mass of intercooler plumbing.. what sort of money would a setup like that cost?? Isn't the fuel feeder/return for the injector rail mounted on the end of it? how did you get around that?

kris.

Link to comment
https://www.sau.com.au/forums/topic/125887-rb20-catch-can/#findComment-2324336
Share on other sites

You can run it like you have in your diagram no worries, This is how mine has been run for 3 years and it works well.

Just need to make sure the catch can is sealed, as if it has a vented filter, you will get a massive vacum leak at idle.

Also you will need some sort of filtration in the catch can, steel wool in a stocking works well, otherwise it will not work

Alternatively you could just block of the PCV valve and run two hoses of the cam covers to a vented catch can, but I found this to be a bit smelly for everyday driving

Chris

Link to comment
https://www.sau.com.au/forums/topic/125887-rb20-catch-can/#findComment-2325132
Share on other sites

Yer ive heard about putting steel wool into the catch can. it might be a bit hard with mine as the only real opening would be the drain hole down the bottom. Ill see how much i can shove into it though.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/125887-rb20-catch-can/#findComment-2325803
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There is a way, but it's not with the same cars. You need to find the same vintage of car, that we had. Realistically, that was an affordable car with aftermarket parts around. So what people need to find is a car that had a decent base in its day, and can be modified. They're looking for a car year make of 2010 to 2015 really... Aus could have done it if Holden didn't fold as V8 commodores were cheap, and if Ford didn't get expensive thanks to COVID, then you could cheaply play with FG Barras. Realistically, those are just a bit heavier, four door skylines. I'm sure the US and UK have similar cars they could find.
    • Haha I do that.. thats when it chirps..The bit point for me is almost non-existent. Otherwise I stall it. But yes, in terms of performance, the clutch is solid af.
    • Greg speaks wisdom. These dirty old Datsuns are only value when they are cheap. When they are not cheap, there is no value. Sounds contradictory, but it's true. We are now 20 years past the hey day of modifying cheap 90s JDM cars for small amounts of money. This is a different world. If you are rich and can afford not to care about what is effectively wasting money on an old Datto shitter, then I have no reason to argue against it. But if you are wanting to experience what we all experienced back in 2005 (and I bought my car last century!) then there is no way to do it.
    • Short answer: No. Medium answer: No, because you still need to conjure the things out of thin air to bolt them to a NA to make it a NA+T. Long Answer: No - The things you need to conjure - meaning a turbo, intercooling, manifolds, exhaust, intake/manifold/piping, clutch, injectors, fuel pump, AFM (?), ECU + Wiring (woo, N/A loom fun) have to come from somewhere. You could have many scavenged these things from an OEM car that someone had upgraded from and use some of these. This will be cost prohibitive now, especially so in the USA. You'd probably pay the same for newer, upgraded components that are better than old OEM stuff from 25-30 years ago. None of these big ticket items are re-usable for the N/A car. Why not buy new and upgrade while you're there? The only real consideration is turbo and fuel sizing and determining whether you want to stay within the bounds of the OEM engine or get into rebuild territory. These limits ARE lower with a N/A motor and especially N/A gearbox at the starting point. And if you're gonna upgrade those then you may as well consider having them built to begin with. Because everyone here knows you're never far from that next engine rebuild once you start making the power you want... The cars you see on the internet and SAU etc have been built over decades. If you're really clued in... you would sell your US car to somebody for what you paid for it. You would then scour AU JDM pages or SAU and buy a car like Dose's on this forum with your powerful American Dollar. This will save you so much money in the long term. Importing it could be tricky. Or it might not because USA. I have long said the only reason 90's Japanese stuff took off was because a) Japanese people had Japanese cars so that is what they used b) Australians could import these cars to Australia with very minimal changes and use them on the road here c) Neither country had well-priced access to US or EU Sports Cars. I don't believe the JDM scene would have taken off in Australia at all if we had EU priced EU BMW M offerings, or more especially the AUS V8 Scene would never have existed if we had the multitude of US cars like Camaros, Mustangs, Corvettes at the prices you folks do. After all - Do the math. I would say put a V8 in your R34 and that's the smart way forward. It is. I did it. I know this from my own experience. But at that point there's no reason to simply not buy a C5 or C6? It would be simpler and easier and cheaper and bette-
    • Reading all this... hurts lol. I have an ENR34 5MT and I paid an inflated USA price for the car alone, had to do tons of preventative maintenance past that, and so I'm over $30K USD into the car already and haven't even touched power.  I wanted to +t it. Not even trying to make GTR numbers, I'd be happy with 250hp.  Can I get away with paying much less to make that happen?
×
×
  • Create New...