Jump to content
SAU Community

Recommended Posts

yeah silver I'd go as far to say the oil cooler is not working properly at all.

In the GTR running around 260kw atw my oil temp sits between 80 and 90 all the time, and certainly doesn't go up just cruising on the free way. The figures you have sound about normal for a car without any oil cooler.

You really need to cut out that splash gauge and preferably fit a louvered extraction vent or at least do a swiss cheese job on it. then build a little duct around it running up to the opening in your front bar. your welcome to have a look at mine if you need some inspiration.

yeah well the way it's mounted now is practically in a sealed box so it's doing fark all cooling. except a small radiation effect. you may as well have installed it in the boot, or your neighbours car for all the cooling benefit you're getting! lol

Just for reference the R33 gtst in the driveway sits at 79 degrees all day everyday regardless of stop/start or highway driving. It moves around 2-3 degrees when you give it some for a while...

Is the rb20 different?

Would of thought it'd be a good idea to get a thermostat and set the oil temp abit lower (say mid to low 70s) will make the engine run cooler and make abit more power too (or so i read in speed lol)

Sorry my bad, thats water temp that sits just under 80 degrees not oil temp, oil temp is slightly higher as ud expect, sorry i got confused for a sec hehe

If you don't agree with running oil slightly cooler being an advantage thats your opinion, the magazine i read obviously feels differently, personally i don't care either way lol!

Edited by jazza08

is there an actual benefit to having the oil at 50 degrees over 80 degrees ?? for example ..

if the cooler keeps it at 80 all the time, would you see any benefit with performance or longevity if it was at 50 degrees instead.

I think 50 might be abit low, but by keeping core engine temps lower the parts operate at a lower temp and will last longer and perform better. Ill have a look later but what i saw was something along those lines! It wasnt a MAJOR drop in oil temp like 30 degrees like you mentioned tho dude, more like low-mid 70s i think!

Im sure someone with abit more knowledge could input on this if they had a read...

What I mean guys, is that going below a certian temperature point where there is no real advantage. Oil works best between 70-100C. Going too cool and the additives are not functioning in their optimum temp range and the oil viscosity is getting too thick.

I'm not saying oil coolers are no good, thats misinterpreting. It means using oil coolers to keep oil in this range for heavily modified cars. It is good to keep the oil temp as close to the coolant temp as possible. If there is major differential, then an oil cooler is needed.

And jazza08, what magazine/article are u referring to? If running cold oil was the bomb, then we might aswell run around with 30C thermostats too.Chasing more hp outta your motor by running cold oil certianly is the wrong way to go about things! If that were the case we'd put our cars on the dyno cold!

Put your car on the dyno cold and expect things to blow up as they aren't at operating temp... ill go have a look abit later through some of the speed/hpi n any other mags i have to see where i read it coz i cant remember off the top of my head!

30 degree thermo's would obvioulsy create problems with the parts running too cold which they aren't suited for, however a few degree's lower i read wasnt such a bad thing. Who knows ill report back some findings i could be way off lol

Ok this is what i was talking about, taken from Perth street mag, even though its a v8 the principles of a cooler motor/parts should apply to all engines.

"With new themostat in place, the engine typically runs 10 degrees cooler but still remains within the acceptable bounds for the standard PCM (above 70 degrees). The standard themo opens at 93deg and is fully open at 105deg. The new thermo starts to open at 80deg and is fully open by 87deg. As a result the enginer runs a higher ignition advance, normally between 5 to 7deg more than normal. At cruise rpm this additional timing is noticeable in the seat of the pants, giving snappier accel and throttle response. With the thermo fitted to a BA GT the peak power result at the wheels rose 3kW but the real story lies in the torque curve which was reaised across the majority of the rev range, with a peak gain of 100N at the wheels"

This is where i read this and got the idea from! Nismo offer a lower temp thermostat for skylines, obviously Nissan must think that its some sort of gain?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...