Jump to content
SAU Community

Recommended Posts

;) looks like my head is farked!! ive got a lot of white smoke/steam coming out of the exhaust . bit of oil on the exhaust tip to. Ive just marked the coolant resovoir bottle and will keep a close eye on it.

Does this sound like a farked head or is there anything else it could be? Only optimistic thought i had was that my car is parked out on the driveway overnight so could maybe be a lot of condensation in the exhaust . will have to drive it around an see what happens... i'll post back .

Any ideas how much a new head would be or getting it overhauled? or would this be the time to look at some more serious mods?

Cheers

Lee

Edited by STAGE-A
Link to comment
https://www.sau.com.au/forums/topic/126287-head-fk/
Share on other sites

stasis dont be silly mate the 26 conversion is pretty pricey and not worthwhile, just buy a 260rs if he wants a 26.

now it could just be condensation as said, or even a blown head gasket. check your oil dipstick and make sure the oil isnt milky white and also under the radiator cap make sure its got no oil in it or bubbles coming to the top constantly while its running. (dont check it when its boiling hot or you will burn yourself taking the cap off)

could even be the turbo seals gone (cant remember what colour smoke is with turbo gone), or easiest way to tell turbo is give it some throttle onto boost and when u back off it will usually smoke pretty bad just as u back off.

head wouldnt be that pricey, i'd say under $1000 easy (well $1000 seems cheap to me from my expenditures but maybe not to you ;) )

other option is take it to a radiator shop and ask them to test it for a blown head gasket, which takes them 5 min to do and thats a 99% accurate test, or do a compression test and u will be able to tell also.

i'd say u are worrying over nuthin but you never know.

let us know how it goes mate :D

Edited by CruiseLiner
Link to comment
https://www.sau.com.au/forums/topic/126287-head-fk/#findComment-2332334
Share on other sites

id say at the worst, head gasket. Unless the car has been really put through some hardcore paces fairly repeatedly, a head shouldnt be cracked or corroded so soon in its life. If its been boiled it may be warped, but yeah.

Like CL said, get it checked. Head gaskets are costly to replace just cos of the time and labour that goes into it, hey. Someimtes you never know for sure til the heads off, though.

Link to comment
https://www.sau.com.au/forums/topic/126287-head-fk/#findComment-2332373
Share on other sites

Yep, what they said: probably a blown head gasket. Apart from the milky-white coloured oil (this is from the oil and water mixing together), you might notice that the exhaust smoke is kinda grey too.

If it's the head gasket, it's not a huge issue. Time consuming job, yes, but not too difficult for even an experienced home mechanic. The head might be warped, but if not they should machine shave it anyway so that when they put the new head gasket on it creates a proper seal...

Link to comment
https://www.sau.com.au/forums/topic/126287-head-fk/#findComment-2332409
Share on other sites

soz cruise just been a bit mischivious thats all.

If you park outside overnite you will get that smokey thing and especially if you switch on your heater as weel.

Now the quickest way to check whether your head are cracked internally is check the radiotor fluid. If theres oil in it it means its crakes. Check from the oild dipstick will do the job as well. But just double check.

Let us know

Link to comment
https://www.sau.com.au/forums/topic/126287-head-fk/#findComment-2332472
Share on other sites

:P cheers everyone!!!

ill take it to get a proper check tomorrow .. ive checked the oil and no signs of water (milky residue ) just waiting for it to cool down a bit now before i try to run it with the radiator cap off like CL mentioned ... will let ya knows after the tests are done

Cheers

lee

Edited by STAGE-A
Link to comment
https://www.sau.com.au/forums/topic/126287-head-fk/#findComment-2332723
Share on other sites

I personally would not say head gasket.

I would be saying turbo is gone for sure.

I am in the middle of putting back together a pulsar that i have which did a head gasket. When the gasket went it was not blowing smoke especially not white smoke.

White smoke=Turbo

Id be happy to be proven wrong

From what i understand white smoke usually means turbo

Link to comment
https://www.sau.com.au/forums/topic/126287-head-fk/#findComment-2332774
Share on other sites

To get the head on the pulsar rebuilt was $600, but that was to fit some new valves as some were bent from a previous incident were the timing belt snapped on me.

That price is just the head being re-built, no labour costs as i am doing the work myself.

As to someone saying that a head gasket is easy to do, it is not easy at all, very time consuming timing belt has to be removed/re-placed, cams removed, valve springs everything else that needs to be removed.

I would not be recomending it for someone with no mechanical experience.

Once again my opinion and each to their own.

Simon

Link to comment
https://www.sau.com.au/forums/topic/126287-head-fk/#findComment-2332792
Share on other sites

my moneys on turbo as well considering u been thrashin it the past couple of days :banana:

to check turbo cant u check your inlet cooler piping and see if its full of oil or is it possible its blown the seals and not got oil in the inlet??? sk?

just a suggestion & good luck mate

Brad

Edited by CruiseLiner
Link to comment
https://www.sau.com.au/forums/topic/126287-head-fk/#findComment-2333051
Share on other sites

haha yep. i guarantee that if your head and gasket isnt stuffed, on of these bad boys will definitely do the trick for you. The smaller one is going into my 31 build. Big ones up for grabs.

Blue smoke is burning oil, black is fuel, pretty sure white is head/gasket.

I did a gasket on the falcon, and everytime i'd start it up, itd blow a massive puff of white smoke. Fixed gasket, all became sweet.

I guess if a turbo puts out the same symtoms, its going to be harder to diagnose til you decapitate it, hey. Spools up and doesnt make any crazy noises?

Link to comment
https://www.sau.com.au/forums/topic/126287-head-fk/#findComment-2335839
Share on other sites

yeah the turbo spools up, no crazy noises.. an no smoke today ?? i dont get it, wasn t able to get it checked either due to a staff member calling in sick so hopefully tomorrow i will know for sure.

is it not smokin at all at idle even? are you sure it wasnt just the cold morning and condensation? has it happened since the other day u started the car?

Link to comment
https://www.sau.com.au/forums/topic/126287-head-fk/#findComment-2336273
Share on other sites

dont worry mate, my stagea blows blue/white smoke on cold starts every now and then.

i asked SK about it and he said that cold richness doesnt produce the same colour smoke as warm richness.

my smoke is just for the first 10 seconds too and only if i give it a bit (maybe 4k under load)

on another note, i didnt notice any water OR oil consumption, so it should be OK afaik.

Link to comment
https://www.sau.com.au/forums/topic/126287-head-fk/#findComment-2337179
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
×
×
  • Create New...