Jump to content
SAU Community

Recommended Posts

hi guys,

what is your opinion on running the intercooler piping back under the cooler and up the same side as the air box. i have been told that in order to run it up the battery (driver) side i will have to install a smaller battery facing longways. As it is an auto dont want to run out of charge and have to get jump started. as i have already purchased cooler with pipe goung out either side do you think the bend back under the pipe will be too restricting?

Link to comment
https://www.sau.com.au/forums/topic/126336-fmic-piping/
Share on other sites

hi guys,

what is your opinion on running the intercooler piping back under the cooler and up the same side as the air box. i have been told that in order to run it up the battery (driver) side i will have to install a smaller battery facing longways. As it is an auto dont want to run out of charge and have to get jump started. as i have already purchased cooler with pipe goung out either side do you think the bend back under the pipe will be too restricting?

This is the style of pipework I use, goes though the inner guard under the battery in the Stagea (under the windscreen washer bottle in the picture which is an R33GTST, they have the batttery in the boot).

med_gallery_1903_124_22845.jpg

:P cheers :P

Edited by Sydneykid
Link to comment
https://www.sau.com.au/forums/topic/126336-fmic-piping/#findComment-2332581
Share on other sites

I have piping that comes out under my battery, but I have a smaller battery, BUT I dont really need a smaller battery, for pics go through the pics in the link in my sig, I cfb right now :P

FYI My Oddessy battery has 880CCA, and it is teeeny tiny!

Link to comment
https://www.sau.com.au/forums/topic/126336-fmic-piping/#findComment-2332586
Share on other sites

SKA- i was looking at your pics of your fmic piping under the battery tray, and i was wondering if your piping sits lower than your chassis?

But i think what stagon is talking about is running the piping through the battery tray ie:cutting a hole in the battery tray meaning he would have to turn the battery so it sits side on so the piping fits through with the battery still there.

like with most fmic kits you buy for 180's and skylines etc...

Link to comment
https://www.sau.com.au/forums/topic/126336-fmic-piping/#findComment-2332828
Share on other sites

just a question when running the intake side under the battery tray through the side i now have no room for my window washer bottle :banana: hows everyone else doing it with the same setups??? or do u just get a smaller washer bottle from soemthing else????

mines the 26 but it still runs through the same spot just under the battery tray but just above the chassis rail.

ideas peoplz???

:)

heres a pic of where my pipe runs through the body

106_0672.jpg

Edited by CruiseLiner
Link to comment
https://www.sau.com.au/forums/topic/126336-fmic-piping/#findComment-2333085
Share on other sites

Yes Cyrus, you are wrong. Your pipes go under your chassis rails like mine did. You have no hole cut.

As far as how low it sits, ive never had any problems at all with hitting my pipes. Infact, they sit pretty high compared to the front bar.

My pipes are for sale if anyone is interested.

Link to comment
https://www.sau.com.au/forums/topic/126336-fmic-piping/#findComment-2333592
Share on other sites

cost me $250 and a case of beer all up, once i sold my standard intercooler :whistling:

only thing im yet to do is mount the "Modified" washer bottle

hey andy is that a modified stock stagea washer bottle is it or another one from a different car?

i gotta sort something out for mine now that i can actually drive the old girl ;)

my piping (3") and greddy type r bov (big sucker) are under the spot so i got absolutely stuff all room unfortunately. might have to make up an aluminium one to suit the room i have.

Edited by CruiseLiner
Link to comment
https://www.sau.com.au/forums/topic/126336-fmic-piping/#findComment-2335313
Share on other sites

hey andy is that a modified stock stagea washer bottle is it or another one from a different car?

i gotta sort something out for mine now that i can actually drive the old girl :whistling:

my piping (3") and greddy type r bov (big sucker) are under the spot so i got absolutely stuff all room unfortunately. might have to make up an aluminium one to suit the room i have.

i just cut off a section of the washer bottle, and used some plastic from a bucket to cover where it was chopped off. then used silicone to stop any leaks. not the most professional job but it sits inside the drivers side inner gaurd so you cant see it anyway.

i still havnt figured out how i will mount it yet, i'll work something out when i get around to putting it back on

Link to comment
https://www.sau.com.au/forums/topic/126336-fmic-piping/#findComment-2335375
Share on other sites

I'd be a fan of getting a front feed manifold, or midifying the standard to front feed, for less clutter.

Ive heard that the shorter the inlet tract, the better the throttle response... thats what its about in the end, right? perfomance? id make it a short as possible. im not one for dressy engine bays, function over from under the bonnet.

MAKE it fit!

Link to comment
https://www.sau.com.au/forums/topic/126336-fmic-piping/#findComment-2335377
Share on other sites

So has anyone actually cut the battery tray so the intercooler pipe can go through there.

Not the side like cruiseliner but the top section the actual battery tray?

So, where would the battery go? I know i dont want a battery in the same cabin as me incase I roll over and get battery acid all over me.

This isnt a Silvia :whistling:

Link to comment
https://www.sau.com.au/forums/topic/126336-fmic-piping/#findComment-2335473
Share on other sites

i think you may be right there, jason. Cos it is designed to be side fed, really. But a GTR inlet manifold... would it fit, and would it be a better option? I can get greddy front feeds from a supplier in japan. worth it? or not unless you really go big?

Link to comment
https://www.sau.com.au/forums/topic/126336-fmic-piping/#findComment-2335511
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...