Jump to content
SAU Community

Which Clutch

BlackRBS13
 Share

Recommended Posts

BlackRBS13 Contributor

BlackRBS13

Posted
Posted

Alright I have an s13 which I am currently swapping an r33 rb26 into and I will be running the rb25 tranny. I am asking if I should use an r32 gtr clutch since the r33 clutch is pull type and the r32 would be push type. Basically which clutch do I need r32, r33 Rb26, or rb25 clutch. Any info on which one to use would be great. thanks guys.

Link to comment
https://www.sau.com.au/forums/topic/126380-which-clutch/
Share on other sites
jantolis Proficient

jantolis

Posted
Posted (edited)

You can get any clutch you want. You can get converters for push to pull type so as long as you get that it should work. I'm assuming you would need a clutch though that works with your tranny though.

Edited by jantolis
Link to comment
https://www.sau.com.au/forums/topic/126380-which-clutch/#findComment-2333445
Share on other sites
T04GTR Grand Master

T04GTR

Posted
Posted

cool.

i honestly sware bu the os-giken twin plats.

there cheap as and last ages. easy to drive.

ive had a ts2bd. (480hp) in my (gtr 315awkw) for about a year. its copped everything i thow at it. track days/drags/general tool driving :D

and for 500bucks of ebay (second hand) its the best value for money yet. :wave:

on another note. i had a nismo gmax. spec 2 in my dr30 (r34 5spd/rb26) it wore out REALLY QUICK).

you can try a good single. but for the same money i know what id raher :O

ps.. 33 5spd gtst is push clutch.

an you can get PULL to PUSH converters not push to pull

Link to comment
https://www.sau.com.au/forums/topic/126380-which-clutch/#findComment-2348196
Share on other sites
  • 2 weeks later...
BlackRBS13 Contributor

BlackRBS13

Posted
  • Author
Posted

Alright so i will be getting an r33 rb26 with a pull type clutch on it. And I will be using the push type rb25 tranny. Is there any way to convert the clutch that will come on the motor to work with the tranny. I basically am looking for the cheapest solution possible right now. In the future I plan to run an OS Giken, Nismo, or Exedy but for now I need a cheap solution. So what is a simple solution preferably a way to use the clutch I have now with the rb25 tranny aka a way to convert the pull clutch to a push. Thanks guys.

Link to comment
https://www.sau.com.au/forums/topic/126380-which-clutch/#findComment-2375542
Share on other sites
rb27tt Contributor

rb27tt

Posted
Posted

dude thats a killer conversion!!!! ive got tha same set up... except r32 rb26 and r33 gtst g/box..

i recomend going for the best clutch you can afford, i have a os giken twin in mine and it hasnt

been able to hold the power!!!!! mine is pumping out 403rwkw @24lb... if your motor is standard

i guess a twin would do......... stuff going a single.. waste of time.. I think singles are for 4 cylinders!!!

Link to comment
https://www.sau.com.au/forums/topic/126380-which-clutch/#findComment-2377752
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Simple answer to a good clutch.

Call Jim (sticky thread in this section)

I have a OS twin with my RB25 box, and that'll be going onto the RB26. Wont be an issue.

The OS did take an exceptional beating, and when we pulled it apart, even though the OS plates are the "thickest" in terms of clutches. It was just about rooted but still worked like new.

That said, and using/seeing other guys with a Jim Berry special... i would choose his should i require another clutch at any stage

Link to comment
https://www.sau.com.au/forums/topic/126380-which-clutch/#findComment-2378674
Share on other sites
T04GTR Grand Master

T04GTR

Posted
Posted
Alright so i will be getting an r33 rb26 with a pull type clutch on it. And I will be using the push type rb25 tranny. Is there any way to convert the clutch that will come on the motor to work with the tranny. I basically am looking for the cheapest solution possible right now. In the future I plan to run an OS Giken, Nismo, or Exedy but for now I need a cheap solution. So what is a simple solution preferably a way to use the clutch I have now with the rb25 tranny aka a way to convert the pull clutch to a push. Thanks guys.

no there isnt a way to convert push to pull gearbox. i think..

you are governd by the clutch arangment for the gearbox. not the engine.

Link to comment
https://www.sau.com.au/forums/topic/126380-which-clutch/#findComment-2385025
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Duncan
      What brakes on R34 GTT(Europe)

      By Duncan · Posted

      Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • 04-LOOX
      R34 GTR Vspec Garage Sale - All must go!

      By 04-LOOX · Posted

      Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...