Jump to content
SAU Community

Recommended Posts

hey ya'll

now i am 22 and in the market for a r34 GT-T, i have wanted one since i was in high skool and am now in the position to be able to affored one. i have already sorced the insurence for 1300, with a 1400 excess(bit high) but thats what ya get with a import i guess

i have had an astra sri turbo before and loved it but it was a bit of a lemon, nothing ever went right

anyway

any help you guys could give me, eg what to look for in a good r34. i am hoping to buy it with wheels and an exhaust already on it, maybe lowered, but these mods usually constitute that the car has had a hard life, e.g been floged around.

this is my first import i am thinking of buyin and i have herd some horror storyies.

any help would be great

thanks

Jake

Edited by Jaker34
Link to comment
https://www.sau.com.au/forums/topic/126481-in-the-market-for-r34/
Share on other sites

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Take your time and dont rush into it!!!!! it took me 6 months before i bought mine. i nearly bought a lemon, but something (god) was on my side, i ended up buying my 34 from brisbane and deliverd it to melb, and im glad i done it.

my car came with everything, 19's, full exhaust, coilovers, bodykit, Power FC & A-vcr. i payed $31k i was wrapped, and the guy had it for sale at $35k for around 4 months.

im loving it, petrol hurts a little but the power refreshs your memory.

I DONT REGRET IT AT ALL!!

just remember PATIENCE is the key :cheers:

good luck on your journey

cheers

steve

Just a question that I've always wanted to ask that Jaker34 might find useful as well.....

I've always been under the impression that the best place to look for newly imported R34s (or any imports) is in Brisbane & the Gold Coast area.

Is there any truth to that? I'll also be in the market for a GT-t later this year hopefully and I intend to go where it's best to go :cheers:

Just a question that I've always wanted to ask that Jaker34 might find useful as well.....

I've always been under the impression that the best place to look for newly imported R34s (or any imports) is in Brisbane & the Gold Coast area.

Is there any truth to that? I'll also be in the market for a GT-t later this year hopefully and I intend to go where it's best to go :P

That's not entirely true. You can find a newly imported R34 in Sydney or melbourne too. It really depend on the car itself and not the location. Maybe you thought about it this way as Queensland is the first port of call for transport ships coming in from Japan :angry:

dont u have to get it totally stock before you can get it complienced??

Yes, if the car that you import has some modifacations then the workshop that is complying your car will have to replace the mods with stock parts for it to be able to get complied. Seems like your fairly new to importing a car, my advice is to do alot of research first it would make your first importing process alot more easier. As the others have said, you have to be patient dont jump on the first one that comes across cause you dont want to be dissapointed. Took me 3 months before I found mine, just ask if you have anymore Qs.

Edited by JUNR34

yeah

dont worry guys, im not an impulse buyer. i always do my research. i have a mate that works down the port who had his car imported, so im just gunna have a talk to him, see who he went through and then see what happeneds.

im in no rush, i get a free car from work so its not like i need it lol. i just want it haha

the work car is pretty handy, i had that too.

As JUNR34 said be patient.

Even when you think your ready, be cautious. I was ready to buy November last year but i waited for the right one to come along and it did, might of been about 4 or 5 months later but its worth the wait when you find it doesnt have problems after you drive away with it.

Here's mine. PUrchased more than a year ago from Motorman Imports in QLD. Strongly recommend them if you are after a clean import. They have heaps of 34s. I'm pretty lucky as I haven't had any dramas with it even after driving it 30Ks later still drives like new and mileage is awesome. Trick is to find a clean example and keep up the regular maintainence ie oil chges every 5000k etc...

post-6973-1153471230.jpg

hey guys

looks like i might be gettin the car sooner then later

id rather get it now, and save to pay back my mum rather then wait

so im gunna fly to ACT and take a look at this one. seems like a resonable deal and come with a warrenty and 12 months rego and resonably low Ks. what ya think??

http://www.carsales.com.au/pls/carsales/&a...amp;sort_type=1

Edited by Jaker34

thanks guys,

dont worry im gettin all that stuff, plus a full RACQ test on the car

im flyin down on sunday to test drive it and check it over.

it is through aussie car compliance, and i looked em up on a few forums and they seem to have a good rep

esspecially the guy im dealin with, his name is joel

anyway so prolly bout 2 weeks i will have joined the skyline ranks hey whoo

Edited by Jaker34

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...