Jump to content
SAU Community

Recommended Posts

thanks risking, I will keep them in mind too if covercraft cant do what i need.

Remember, if its not on, its not on.

Seriously though there has been a genuine Nissan car cover for BNR32 brand new on Yahoo for weeks now :action-smiley-069:

mmm that could be an option...

covercraft has just got back to me. he suggested 3 different covers:

one is $380 and is a 4 layer cover

one (noah) is $408 and has a micropouros layer in the middle of the 4 layers.

one is $566 and is a really thin parachute like material but with silicone in it and is 98% water proof, scratch proof etc.

Remember, if its not on, its not on.

Seriously though there has been a genuine Nissan car cover for BNR32 brand new on Yahoo for weeks now :(

How much is it Nick?

My computer doesnt load the Jap pages

mmm that could be an option...

covercraft has just got back to me. he suggested 3 different covers:

one is $380 and is a 4 layer cover

one (noah) is $408 and has a micropouros layer in the middle of the 4 layers.

one is $566 and is a really thin parachute like material but with silicone in it and is 98% water proof, scratch proof etc.

I've had the thin waterproof Covercraft one for about 3 years on one of my cars.

The car is outside under a tree all the time & besides fading from black to grey on the outside, (the inside is still black), it is still 98% water proof.

The only problems I have had is that I had to take it to a trimmer to sew on some straps with plastic clips that go under the car to hold it on in the wind (had to chase it down the street the day after i bought it!)

Also, the stitching has only just begun to undo in the elastic where it rubs on the tyre all the time.

Edited by frogman

OMGZORS mannn, youze are all pewfs!!!

seriously though just get a 50-100 buck one, no need to go overboard

remember its only a 32GTR we arent talking about bentleys and lambo's here, a cheapish one is not likely to "ruin your paintjob" :blink: almost 600 bucks for a car cover?? :spew:

  • 1 year later...

i went soft of the whole car cover issue. but from what I found out the covercraft ones seem to be the bees knees. I would go for the $410 one with the extra middle layer.

if it means anything i bought a kenco one a few years ago, i have used it on my 4 last cars and it worked perfectly.

fitted nicely, but if it was outside and windy.... you were almost best leaving it of because it moved... it only has one strap on it.

but if your looking for one when the car is inside, then just get your regular cheap ones, they dont scratch and if they have anything on them that might scratch... just cut it off.

the one i have is just a thin 1 layer thing, but its not like a tarp its a very soft fabric. perfect for inside protection.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...