Jump to content
SAU Community

Recommended Posts

Hmm.. Just done a little looking and found these ones..

Pure Grunt Hi-Performance Centre

81B Dixon Rd Rockingham WA 6168

ph: (08) 9592 8100

Kwinana Performance

South Of The River Performance Shop

10 Arkwright Rd Rockingham WA, 6168

Australia - (08) 9529 3636

I think you will find the best places are up around Perth for tuning and performance modifications, Hyper Drive would be my pick of the bunch, It would be a bit of a drive for you but would be well worth it, Ken is a Skyline nut and also sponsors this club!

Even if your looking for a normal service it pays to get it done by people that work on these cars every day. (Might cost an extra few $$ but its worth it.)

http://www.hyperdrivems.com.au/

Give him a call and see what he says! Nice honest bloke with an awesome reputation.

I wouldnt go to either of those workshops previously mentioned... they are mostly into your holdens and fords from what I've seen.

21st Century did my 100,000km service they were pretty good, and another friend has taken his skyline there aswell and had a good experience also.

Otherwise, take it to somewhere up closer to civilisation.

(I also am previous rockingham resident).

basic services are very easy to do yourself once you know how. This saves some money and gives you a growing amount of confidence as you go when it comes to thing mechanical.

You may be able pursade a friendly south of the river SAU person to change oil , check plugs etc. for a beer wage .

Watch and learn. Then give it a go the next time with a bit of supervision.

As it was once said. What I hear I forget , What I see I remember and What I do I understand.

Yes well after hearing $150 for an oil change I think I'm gonna be calling on my brother to help me out lol

I need the boost gauge connected up as the guy who sold it to me disconnected it...F*k knows why!!

And need to get them to check the SAFC is all ok :(

Thanks all, its good to know I can get advice/help here!

:D

Kylie

Yes well after hearing $150 for an oil change I think I'm gonna be calling on my brother to help me out lol

I need the boost gauge connected up as the guy who sold it to me disconnected it...F*k knows why!!

And need to get them to check the SAFC is all ok :cheers:

Thanks all, its good to know I can get advice/help here!

:laugh:

Kylie

Yes Kylie but what oil are you using?

Last time I priced Auto one or even Coventrys full synthetic Mobil oil was $65 per 5L and a Nissan filter was $15.

Based on that then the balance has to cover oil disposal , getting the car on the hoist , checking all fluids under the car , tyre pressures, check all supension, brake pads , lights , hoses , give a report and small top ups such as power steering fluid etc.

Yep , these import shops are a ripoff if all they are doing is changing the oil but if it's a minor service ( which is what the above is classed as at our shop then I think that's reasonable value. Actually we charge $150 plus GST for the above.

Cheers

Ken

Hi Ken,

Before I had rung hyperdrive, I read on the forums that that was how much it cost to get the oil changed. (it was a comment in general, no mention of which shop and where)

I had my PT Cruiser (don't laugh) serviced just before I sold it and that was $189 and was oil and other fluid checks. :cheers: So I don't think you're a rip off at all. In actual fact I've never said anything about it being a rip off or need someone cheap.

I'm a firm believer in, 'you get what you pay for'

Oh and I ended up putting in Motul turbolight - because someone recommended I use a 10W40 oil on the type of driving I do. Had nothing to do with price.

I hope this clears up what seems to me as a misunderstanding.

My brother speaks very highly of the work you do and I do trust his judgement :laugh:

Regards,

Kylie

PS... was that you I met on Friday (me with the squealing belt)

Sorry Kylie , wasn't meant to be a dig back at you , just stating the facts of what we do as opposed to some other shops that may only change the oil and filter and not use a full synthetic.

Yes , I was the old fart who originally looked at the belts and then Andrew came out and put some stuff on.

:P:dry:

Cheers

Ken

Sorry Kylie , wasn't meant to be a dig back at you , just stating the facts of what we do as opposed to some other shops that may only change the oil and filter and not use a full synthetic.

Yes , I was the old fart who originally looked at the belts and then Andrew came out and put some stuff on.

:P:dry:

Cheers

Ken

Just out of curiousity what did you use for the squeaky belts ? :(

Good to see another rocko-ite too. Im from Warnbro myself and recommend taking the drive to hyperdrive to get work done. Minor servicing i do myself now because its a few bucks cheaper, but more to the point its a bit far to take it for something i can do myself.

If you need to get stuff done like tune your SAFC like i did, hyperdrive is your best bet i reckon, dont ever trust your car with a local mechanic as you'll probably only get a half done job and your car thrashed. Good thing about places like hyperdrive is i know they're not going to thrash my car cos im sure they see 15 better cars each day, why would they want to thrash my car :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...