Jump to content
SAU Community

Recommended Posts

Im looking for a standard r33 series 2 bonnet in either black or watever colour, as long as it is in good condition. What wreckers will be selling these? also is there anyone on this forum with one in vic that will like to trade with my CF bonnet?

Thanks. Phill

Link to comment
https://www.sau.com.au/forums/topic/128056-standard-r33-s2-bonnet/
Share on other sites

try uas in sydney

nismo.com.au

no luck, they only have CF parts. This bonnet on my car now is valued at 800. I havnt touched it in any way or form to devalue it. Pretty much perfect.

yeah i was pretty fussy aswell that it doesnt line up propperly. Maybe someone with a S1 would like to buy it... But i do want a S2 bonnet. So a swap with a cash fix ontop will be accepted. Or just buy it.

il also find a pic of the old cf bonnet it had.

Edited by LTHLRB
yeah dezz thats a series 2 CF bonnet. Too bad it caught alight :(. Whats the ballpark figure that a gen bonnet will be worth?

new- no idea, but it will be mega bucks

second hand, no idea, as most of the people that are selling parts have had a front on and destroyed the bonnet anyway :wave:

damn. I really like the series 2 bonnet. My car isnt a series 2 though. Looks very similar to yours but without the gtr wing and with the different front bar. But it really sets the car off

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
×
×
  • Create New...