Jump to content
SAU Community

Recommended Posts

can anyone tell me if and where in this state can i get my coilovers repaired, revalved,i have been told that some where up the north west there is some one ,does anyone have any info they could pass on? cheers jb :)
Fulcrum are the only Aussie agent... There are a couple of other smaller joints on the mainland but I wouldnt trust them, plus no warranty...

As Justin said, Fulcrum are the only Australian agent and they are VERY expensive.

If you really want to keep the Teins then you have to weigh up your options:

Shipping them to and from brisvegas.

Repair costs (includes labour and parts)

Overall price for repair VS new shocks.

Like wogboy said he bought bilsteins (so did i) instead of getting others repaired, it not only worked out cheaper for me the car was set up better with them as the TEINS were just to hard for our road conditions and what i wanted to do.

At the end of the day JB its upto you and if your willing to spend the money on them, if you are then send em off and get Fulcrum to do them, if you dont want to then maybe look at selling your 2nd hand to recover a little bit of money and buy something else :)

Cheers GMB

Fulcrum Supension in QLD are the Tein agents and do all that stuff, but very expensive.

Never found anyone in Tas, just bought some Bilsteins instead.

ok ,what do you call expensive? whats the sort of price range around the bilsteins?, and are they adjustable?

ok ,what do you call expensive? whats the sort of price range around the bilsteins?, and are they adjustable?

I was just after lighter Tien springs for my R34, they wanted $650 + Del. For rebuild I reckon they ask at a mininum $150 a shock.

SAU have a gp buy going on for Bilstien & White Line springs (for R32, R33 & R34s), they are around $1200 deliverd (4 shocks & 4 springs) & sold my Tiens on E-bay for $900, so new suspension only cost me round $300.

Tiens are O/K if there are on a track car but on Tassie roads they are crap! rattle & knock plus way to stiff! IMHO.

I was just after lighter Tien springs for my R34, they wanted $650 + Del. For rebuild I reckon they ask at a mininum $150 a shock.

SAU have a gp buy going on for Bilstien & White Line springs (for R32, R33 & R34s), they are around $1200 deliverd (4 shocks & 4 springs) & sold my Tiens on E-bay for $900, so new suspension only cost me round $300.

Tiens are O/K if there are on a track car but on Tassie roads they are crap! rattle & knock plus way to stiff! IMHO.

so what you are saying is you have a better ride on the road ,and kept good performance ,but are you able to adjust the height ? because at the moment i can to suit my needs for ground clearance.

so what you are saying is you have a better ride on the road ,and kept good performance ,but are you able to adjust the height ? because at the moment i can to suit my needs for ground clearance.

That's right.

Bilstiens are still height adjustable via circlip.

yeah, as you said there are multiple groves under the spring seat that alow your to adjust the height... mine are set to the lowest at the rear and are second from the bottom at the front.

You will also notice that they are reccomended by 'sydneykid' in the suspension section and offered by him with a package in the group buy section.

I personally have purchaed the whole package he is offereng and can't wait to install it and to have it all aligned to his specs! He appeares to have tested a lot and to know his shit plus there has been an aweful lot of positive feedback from his work.

Worth looking in to at least!!

Edited by CATKICKER

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...